RH2285 v2 server enters the BIOS

olive.zhao · Created Aug 20, 2019 14:53:45

Hello!

Did you do an incorrect configuration for the BIOS?

You can log in to the system via the CLI of the management interface and run the following command:

ipmcset -d clearcmos

Restoring BIOS Factory Settings

Default IP address of the management interface: 192.168.2.100

Default account root Default password: Huawei12#$

olive.zhao · Created Aug 20, 2019 14:53:45

Hello!

Did you do an incorrect configuration for the BIOS?

You can log in to the system via the CLI of the management interface and run the following command:

ipmcset -d clearcmos

Restoring BIOS Factory Settings

Default IP address of the management interface: 192.168.2.100

Default account root Default password: Huawei12#$

wissal · Created Aug 20, 2019 14:57:48

Hi,

Connect the keyboard, video, and mouse (KVM) to the server, or open the remote control page on the web user interface (WebUI).
NOTE:
For details about how to log in to the WebUI, see iMana User Guide.
Power on the server. For details, see server manuals.
If the screen shown in Figure 2-1 is displayed, press DEL or F4 to go to the BIOS Setup Utility screen.
If you press F11 or F3 to open the screen for selecting a boot option or F12 to boot from the Pre-boot Execution Environment (PXE) instead of DEL or F4, you need to enter the password. The default password is Huawei12#$. The server will be locked after three consecutive failures with wrong passwords. Restart the server to unlock it.
Figure 2-1 BIOS Setup Utility
Enter a password as prompted, as shown in Figure 2-2.
NOTE:
- You need to enter the default BIOS password Huawei12#$ before logging in to the BIOS of the RH2288A V2, XH321 V2, RH2288E V2, DH622 V2, and DH626 V2. The other servers have no default BIOS password.
- A user account will be locked after three consecutive login failures with incorrect passwords. The user account can be unlocked only by restarting the server.
Figure 2-2 Enter Current Password
Set the parameters on the BIOS Setup Utility screen.

Thanks

Root.Piao · Created Aug 21, 2019 11:34:40

Posted by ganmianpi at 2019-08-20 14:53 hello, did you make an incorrect configuration for the BIOS?You can log in to the system through th ...

thank you

Root.Piao · Created Aug 21, 2019 11:34:50

Posted by wissal at 2019-08-20 14:57 Hi,Connect the keyboard, video, and mouse (KVM) to the server, or open the remote control page on th ...

thank you