This document describe how to reset the password of FusionHome application and inverter Wi-Fi following the below steps.
Procedure:
Step 1 Turn off the SUN2000L DC switch and battery switch.
Step 2 Turn off the AC switch.
Step 3 After all indicators on the SUN2000L panel are off, turn on the AC switch.
Step 4 Wait for the LED AC indicator (LED2) on the panel blinks, and turn off the AC switch.
OBS: please note that the interval between two power-off operations cannot exceed 3 minutes.
Step 5 Turn on the battery switch, AC switch, and DC switch in sequence. All three LED indicators blink.
Step 6 About 30 seconds later, all three LEDs are off, and the initial passwords are restored successfully.
The Wi-Fi network is restored to the initial password "Changeme" and the FusionHome app is restored to the initial password "00000a".
