RESET FAT AP5010

user_2790689 · Created Jul 29, 2015 10:18:07

Please wait.

Ws1plzbf · Created Jul 29, 2015 12:03:25

Press the Default button:)

RESET FAT AP5010-1660213-1

judyblue · Created Aug 6, 2015 14:07:05

For Fat AP5010, please refer to Official Huawei AP5010 Series Access Point Datasheet.

damil · Created Aug 6, 2015 14:12:09

Thanks for the help :)

seppibrown · Created Sep 1, 2018 21:15:22

yangyong · Created Sep 11, 2018 01:52:35

WLAN features supported by the AP are as follows:

Compliance with IEEE 802.11a/b/g/n
AP5010DN-AGN supports 2 x 2 MIMO and provides a maximum rate of 600 Mbit/s.
AP5010SN-GN supports 2 x 2 MIMO and provides a maximum rate of 300 Mbit/s.
Maximum ratio combining (MRC)
Space time block code (STBC)
Beamforming
Low-density parity-check (LDPC)
Maximum-likelihood detection (MLD)
Frame aggregation, including A-MPDU (Tx/Rx) and A-MSDU (Rx only)
802.11 dynamic frequency selection (DFS)
Short guard interval (GI) in 20 MHz and 40 MHz modes
Priority mapping and packet scheduling based on a Wi-Fi Multimedia (WMM) profile to implement priority-based data processing and forwarding
Automatic and manual rate adjustment
WLAN channel management and channel rate adjustment

This post was last edited by yangyong at 2018-10-31 08:26.

Amr_Fayrouz_Elattar · Created Mar 2, 2019 16:01:01

you can check below link for reset FAT AP
https://support.huawei.com/enterprise/en/doc/EDOC1100033727?section=j00h&topicName=resetting-an-ap