Have issue with router NE40E-M2K-B and cannot access it via Console anymore? If you input the password and display that is wrong please do the following:
1. Upload to FTP another NE configuration file (config_file.zip) for which you know the console password.
e
2. After you have an FTP server set up, please go to NE device in <1> Ethernet submenu
1. =====================================
2. *** Kernel Menu ***
3. =====================================
4. <0> List file(s) in cfcard.
5. <1> Enter ethernet submenu.
6. <2> Download debug log.
7. <3> Change password.
8. <4> CFcard Format Submenu.
9. <5> Set boot file and path.
10. <6> Reboot.
11. <V> Review result
12. <L> Language Switch
13. <U> Upper Menu..
3. Please select “Modify Ethernet interface boot parameters”.
And input the IP of the FTP server and the username and password to loign to the FTP server. Please make sure the IP of the NE to be in the same network segment.
4. Please upload the configuration from the FTP server to the NE.
5. Then try again to rename the startup file like you did before, but this time please insert the name of the file transferred from FTP for which you’ve set up the console password.
=====================================
*** Kernel Menu ***
=====================================
<0> List file(s) in cfcard.
<1> Enter ethernet submenu.
<2> Download debug log.
<3> Change password.
<4> CFcard Format Submenu.
<5> Set boot file and path.
<6> Reboot.
<V> Review result
<L> Language Switch
<U> Upper Menu..
Enter your choice: 5
=====================================
*** Boot Info submenu ***
=====================================
<0> Modify the boot file
<1> Modify the paf file
<2> Modify the config file
<3> Modify the patch file
<4> Clear the patch file
<V> Review result
<L> Language Switch
<U> Upper Menu..
Enter your choice: 2
next_cfgfile test.zip :cfcard:/test.cfg
Set next config file Success
Hope this helps
