Method 1: Setting Parameters on the WebUI
Ø Log in to the WebUI, choose Maintenance > System Maint., and export the configuration of the old SmartLogger.
Ø Choose Maintenance > System Maint., and import the configuration of the old SmartLogger to the new SmartLogger3000.
Ø (Optional) Choose Maintenance > Device Mgmt. > Data Recollection to synchronize inverter information
*If a faulty SmartLogger2000 or SmartLogger1000A is replaced with a SmartLogger3000,
the full configuration file exported from the SmartLogger2000 or SmartLogger1000A does
not contain the performance data or energy yield information of inverters. Synchronize the
data if required.
Method 2: Setting Parameters on the App
*Configuration export and import need to be performed using a USB flash drive. SanDisk, Netac, and Kingston USB flash drives are supported. USB flash drives of other brands are not tested for compatibility and may not be recognized.
Ø Insert the USB flash drive into the USB port of the SmartLogger.
Ø Log in to the app and export data.
Ø Insert the USB flash drive that stores the exported files into the USB port on the new SmartLogger3000.
Ø Log in to the app and import data.
Method 3: Setting Parameters on the LCD ( only for Smartlogger 1000 )
*Configuration export and import need to be performed using a USB flash drive. SanDisk, Netac, and Kingston USB flash drives are supported. USB flash drives of other brands are not tested for compatibility and may not be recognized.
Ø Install the USB flash drive to the SmartLogger1000.
Ø Export configurations on the LCD of the SmartLogger1000.
Ø Insert the USB flash drive that stores the exported files into the USB port on the new SmartLogger3000.
Ø Log in to the app and import data.
