Remote Virtual Connection Gives White blank Screen trying to open from iMANA200 for Huawei 2288V2 servers
Can any one suggest solution for this problem. When I login to iMANA200 login with root user and try to open Remote Connection, It gives white screen. I have allowed popups, I face problem for just Huawei 2288V2 servers otherwise iBMC connections for other server types working properly, I have attched screenshotd for reference, Thanks in advance!
- x
- convention：
- Emotion(0)
|
Hello, rishabh! You are suggested to add the iMana address https://192.168.2.100 to the Exception Site List in order to use remote control.
|
rishabh007
Created Feb 6, 2020 14:56:14
(0)
(0)
Hi Stephen, Thanks a lot for your answer. It makes sense and I have tried this also but didn't work. I have found one KVM.sh script which also helps to create local console and it worked so I can use that alternative for initial RAID and OS setup. Once again thanks a lot for your suggestion.:) 
stephen.xu
Reply rishabh007 Created Feb 10, 2020 02:00:57
(0)
(0)
You can share how you encountered this problem and how you eventually solved it. I think it must be a very valuable experience, thank you very much!
rishabh007
Reply stephen.xu Created Feb 10, 2020 14:20:32
(0)
(0)
Hello Stephen, I have used following script which is giving local access same as iBMC remote connection. I used CentOS base OS host to run this script, again it didn't worked on ubuntu. I am pasting script here for reference. Once again, thanks a lot for you help.:) |
|
Thanks Wissal. I have JRE 1.8.0 installed and checked security options there are only two options.1)Very High 2)High. Hence, it is set to high already
|
|
|
Hello, rishabh! You are suggested to add the iMana address https://192.168.2.100 to the Exception Site List in order to use remote control.
|
rishabh007
Created Feb 6, 2020 14:56:14
(0)
(0)
Hi Stephen, Thanks a lot for your answer. It makes sense and I have tried this also but didn't work. I have found one KVM.sh script which also helps to create local console and it worked so I can use that alternative for initial RAID and OS setup. Once again thanks a lot for your suggestion.:)
stephen.xu
Reply rishabh007 Created Feb 10, 2020 02:00:57
(0)
(0)
You can share how you encountered this problem and how you eventually solved it. I think it must be a very valuable experience, thank you very much!
rishabh007
Reply stephen.xu Created Feb 10, 2020 14:20:32
(0)
(0)
Hello Stephen, I have used following script which is giving local access same as iBMC remote connection. I used CentOS base OS host to run this script, again it didn't worked on ubuntu. I am pasting script here for reference. Once again, thanks a lot for you help.:) |
Comment
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
