Hello, please try to use any of these 2 solutions.. Is this a S5600 or S5700 ?
solution 1:
1. connect serial cable to S5600's serial port, adjust the baudrate to login the controller.
2.use account:_super_admin, password:321654
3.input command:initpassword
4.reinput the 321654
5.then the admin's password is reset to 123456, reboot the controller the password will be ok.
solution 2:
1. connect serial cable to S5600's serial port, adjust the baudrate to login the controller.
2. use account:OceanStorS5100, password:i6@e5y*n. input & meanwhile enter shift + 9, enter the debug mode
3. input command passwd admin, input newer password.
4. input exit, then relogin with admin account is ok.