record only when motion detected
Created: May 19, 2019 10:44:47Latest reply: May 28, 2020 08:37:19
619
2
0
0
0
Rewarded HiCoins：
0
(problem resolved)
- x
- convention：
- Emotion(0)
Featured Answers
|
Hi!
You can configure an alarm-triggered recording. [tr]Recording Type Function [/tr]
For details, see Alarm Linkage. To set the alarm triggering condition to Motion detected and Lens blocking, you need to configure motion detection and lens blocking detection by referring to Configuring Motion Detection on the VCN and Configuring Lens Blocking Detection respectively. Configuring Motion Detection on the VCN
This section describes how to configure the motion detection function on the VCN. Background You can configure the motion detection function in the quick setting area or on the Devices tab page of the C/S client.
In the Cameras panel, select a camera for which you want to configure motion detection. Select PU-based motion detection. Set the parameters for motion detection. Table 1 describes the parameters. Table 1. Parameter description[tr]Parameter Description [/tr]
</ol> Click Save. Click OK. </ol> Configuration on the Devices Tab Page 1. Log in to the C/S client of the VCN as the admin user and double-click Devices. 2. Click the Local Domain tab. 3. Double-click the camera, and choose Video > Motion Detection. 4. Configure motion detection, as shown in Figure 2. Figure 2. Motion Detection Setting tab page  a) Select PU-based motion detection. b) Set Motion detection interval(s), Motion detection sensitivity and Alarm check interval(s). c) Click Add Area and adjust the detection area. d) Click Apply. e) Click OK. | ||||||||||||||
|
||||||||||||||
All Answers
|
Hi!
You can configure an alarm-triggered recording. [tr]Recording Type Function [/tr]
For details, see Alarm Linkage. To set the alarm triggering condition to Motion detected and Lens blocking, you need to configure motion detection and lens blocking detection by referring to Configuring Motion Detection on the VCN and Configuring Lens Blocking Detection respectively. Configuring Motion Detection on the VCN
This section describes how to configure the motion detection function on the VCN. Background You can configure the motion detection function in the quick setting area or on the Devices tab page of the C/S client.
In the Cameras panel, select a camera for which you want to configure motion detection. Select PU-based motion detection. Set the parameters for motion detection. Table 1 describes the parameters. Table 1. Parameter description[tr]Parameter Description [/tr]
</ol> Click Save. Click OK. </ol> Configuration on the Devices Tab Page 1. Log in to the C/S client of the VCN as the admin user and double-click Devices. 2. Click the Local Domain tab. 3. Double-click the camera, and choose Video > Motion Detection. 4. Configure motion detection, as shown in Figure 2. Figure 2. Motion Detection Setting tab page a) Select PU-based motion detection. b) Set Motion detection interval(s), Motion detection sensitivity and Alarm check interval(s). c) Click Add Area and adjust the detection area. d) Click Apply. e) Click OK. | ||||||||||||||
|
||||||||||||||
Comment
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
