RADIUS-Server Commands on ME60 BRAS

Hi sachandio,
The radius-server retransmit timeout command configures the number of transmission times and retransmission timeout period used by the device to send request packets to RADIUS servers.

You can refer to https://support.huawei.com/hedex/hdx.do?docid=EDOC1100168793&id=EN-US_CLIREF_0000001102378686&lang=en

The radius-server accounting-start-packet resend command configures the number of times that cached accounting-start packets are retransmitted to the RADIUS accounting server in a RADIUS server group. You can refer to https://support.huawei.com/hedex/hdx.do?docid=EDOC1100168793&id=EN-US_CLIREF_0000001148898803&lang=en

The radius-server format-attribute command configures the format of the NAS-Port or NAS-Port-Id attribute. You can refer to https://support.huawei.com/hedex/hdx.do?docid=EDOC1100168793&id=EN-US_CLIREF_0000001102538994&lang=en

The radius-server class-as-car command configures a packet to carry the CAR value. You can refer to https://support.huawei.com/hedex/hdx.do?docid=EDOC1100168793&id=EN-US_CLIREF_0000001102658928&lang=en

The radius-server algorithm command sets the algorithm of a RADIUS server. You can refer to https://support.huawei.com/hedex/hdx.do?docid=EDOC1100168793&id=EN-US_CLIREF_0000001148978477&lang=en

I hope it helps!

Dear colleague, your question is of the utmost importance, I will contact you shortly to give a satisfactory answer. wait a moment.