Radius IPV6 Accounting

Popeye_Wang · Created Jul 10, 2020 09:09:06

Hi,

You can assign dual-stack addresses through the attributes.

For the IPv4 you should use the Framed-IP-Address Attribute 8

For the IPv6 you can use Framed IPv6 Attribute 158,

And if you have an external RADIUS, you may have to perform an attribute translation within vendors:

If this doesn't work too, you can try contacting tac directly to help you with the problem.

liqiang185 · Created Jul 8, 2020 14:06:06

Hello, mrod.
It's nice to meet you in the community.
We're working on your problem. Please be patient.

Popeye_Wang · Created Jul 8, 2020 15:46:04

Hi,
The configuration is basically the same as IPv4. Just add IPv6 address pool under the domain

Popeye_Wang · Created Jul 9, 2020 01:25:00

Posted by Popeye_Wang at 2020-07-08 15:46 Hi,The configuration is basically the same as IPv4. Just add IPv6 address pool under the domain

Ok，then you may need to add the Framed-Ipv6-Pool Attribute configuration. For details, see
https://support.huawei.com/hedex/hdx.do?docid=EDOC1100075578&id=dc_ne_aaa_cfg_0006&lang=en

Popeye_Wang · Created Jul 10, 2020 09:09:06

Hi,

You can assign dual-stack addresses through the attributes.

For the IPv4 you should use the Framed-IP-Address Attribute 8

For the IPv6 you can use Framed IPv6 Attribute 158,

And if you have an external RADIUS, you may have to perform an attribute translation within vendors:

If this doesn't work too, you can try contacting tac directly to help you with the problem.