Good Morning, I have a Setup of One Access Controller AC6005 with three AP AP7110-SN GN on a layer 2 scheme two of the APs are using a pair of service sets with wpa2-psk and a sta-whitelist profile and is working fine. the third AP is using a different service set with WPA2-EAP and TKIP-CCMP encryption and a radius template with all the parameters defined, the situations is as follows:
I try to connect from a Smartphone to the SSID of the third AP and enter the parameters of PEAP username and password, but the conection does not succeed.WHen I activate the debugging of the dot1x protocol and look at the logs just say that the EAPOL Data are comming from teh sta to the AP and are being rejected by the AP WLAN-ESS 3 Interface (type 4 packet of EAPOL). I have configured everything according with the configuration manual and the VRP Version of my controller.Please could anyone post any help on this. Here are the logs
My SMartPhone MAC is 8451-81dc-504d.
Thanks in Advance.
********************************************************************************************************************************************************************
<AC6005_ATI>
Mar 19 2015 09:17:14.988.1-05:00 AC6005_ATI WLAN/7/WLAN_DEBUG:
WSEC_WPA2ReceiveAssociate
<AC6005_ATI>
Mar 19 2015 09:17:14.988.2-05:00 AC6005_ATI WLAN/7/WLAN_DEBUG:AP ID:4(d849-0b94-49b0)STA MAC:8451-81dc-504d
Enter WSEC_InitiateEapolStartMessage:
StaIndex = 4
Interface = 34
VlanId = 150
<AC6005_ATI>
Mar 19 2015 09:17:14.988.3-05:00 AC6005_ATI DOT1X/7/DEBUG:
[EAPOL-info] [EAPOL_NoPktStartProcess] Received wlan associate request.(MAC=8451-81dc-504d,IfIndex=34,Vlan=150)
<AC6005_ATI>
Mar 19 2015 09:17:14.988.4-05:00 AC6005_ATI DOT1X/7/DEBUG:
[EAPOL-info] EAPOL_Dot1xUserAssociateStart Received Wlan Timer Msg .(MAC=8451-81dc-504d,Index=511,ulCMIndex=4294967295)
<AC6005_ATI>
Mar 19 2015 09:17:14.988.5-05:00 AC6005_ATI DOT1X/7/DEBUG:
[EAPOL-info] EAPOL_Dot1xUserAssociateStart User is in authening status, wlan request start pkt will not be proc.
<AC6005_ATI>
Mar 19 2015 09:17:15.168.1-05:00 AC6005_ATI DOT1X/7/DEBUG:
[EAPOL-timer] User response timeout.(ulIndex:511)
<AC6005_ATI>
Mar 19 2015 09:17:15.168.2-05:00 AC6005_ATI DOT1X/7/DEBUG:
EAPOL packet: OUT
84 51 81 dc 50 4d 64 3e 8c 42 a7 10 81 00 00 96
88 8e 01 00 00 04 04 fc 00 04
<AC6005_ATI>
Mar 19 2015 09:17:15.168.3-05:00 AC6005_ATI DOT1X/7/DEBUG:
[EAPOL-packet] Send EAP packet to user successfully. (type:4, packet length:26, output interface:Wlan-Dbss3:3, VLAN:150, return:0)
<AC6005_ATI>
Mar 19 2015 09:17:15.168.4-05:00 AC6005_ATI DOT1X/7/DEBUG:
[EAPOL-info] Send EAP_failure packet to user successfully.(ulIndex=511)
*************************************************************************************************************************************************************
