Hello,
I find the information below hope it can help you
ETP4830-A1 subrack composed by 2xR4815G 1xSMU01C, comes with 1x pre- connected Europe power cable, 110V~220V AC input.
Supports a wide voltage range of 85 V AC to 300 V AC.
Maximum output power: 1740W
2 load max 20A, 1 port BATT max 20A
Provides comprehensive battery management.
Supports SMU01A, SMU01B, SMU01C Monitor module.
Supports WebUI remote management and SNMP only in SMU01A.
The SMU01B can connect to the U2000 over Huawei master/slave protocols.
Displays information on a LCD and provides buttons for operations.
Supports electronic labels.
Rectifiers and the site monitoring unit (SMU) are hot-swappable.
Apply for Huawei OLT, Huawei OSN, Huawei Router and Huawei Switch.
ETP4830-A1 can convert from 220V or dual-wire of 110V input to stabilized - 48V DC output. It can also be configured with 48V/15A rectifiers and provide 30A output. All the function units have standard sized design with 1U. ETP4830-A1 can be embedded in 19-inch rack or cabinet or other scenarios. The system can provide excellent performance such as intelligent battery management, remote monitoring, etc.
Tech Specs
Specification
|
| AC Input mode | 230 V AC single-phase three-wire (L, N), compatible with 230 V AC dual-live-wire (L,L) |
| AC Input frequency | 45–66 Hz (rated frequency: 50/60 Hz) |
| Power factor | ≥ 0.99 (100% load) |
| Input voltage frequency | 45 Hz to 65 Hz |
| DC Output voltage range | -42 V DC- -58 V DC |
Maximum output power (W) | 1740 |
| Surge protection capability | 2 kV in differential mode
4 kV in common mode |
| Dimension (mm) | 442(W)×255(D)×43.6(1U,H) |
Weight (kg)
| ≤8 (fully loaded) |
| Operating temperature | -40ºC to +70ºC |
| Operating humidity | 5%–95% RH (non-condensing) |
| Storage humidity | 5%–95% RH (non-condensing) |
More detail
https://www.cdr.pl/download/huawei/R4815N1.pdf
Thanks
