Qx/TL1 Prorocol - RTN910

new1 · Created Jul 28, 2017 06:05:32

RTN 910 uses Qx interfaces to communicate with iManager.
The Qx interface is management protocol interface designed for Huawei's OptiX equipment. The protocol stack and messages used by Qx interface is developed based on ITU-T G.773, ITU-T Q.811, and ITU-T Q.812.

new1 · Created Jul 28, 2017 06:05:32

RTN 910 uses Qx interfaces to communicate with iManager.
The Qx interface is management protocol interface designed for Huawei's OptiX equipment. The protocol stack and messages used by Qx interface is developed based on ITU-T G.773, ITU-T Q.811, and ITU-T Q.812.

aselac · Created Jul 28, 2017 07:52:48

Posted by new1 at 2017-07-28 06:05 RTN 910 uses Qx interfaces to communicate with iManager. The Qx interface is management protocol in ...

Thanks for update.
Can we use SNMP instead of Qx communicate between iManager & RTN910.

new1 · Created Jul 29, 2017 01:23:35

You could SNMP between RTN910 and other SNMP server, not U2000.
Qx is used between U2000(southbound) and RTN910.

aselac · Created Jul 31, 2017 04:05:33

Thanks. Then how to configure SNMP parameters? Is it ok to using SNMP Communication Parameters on Communication settings.

aselac · Created Aug 1, 2017 06:48:27

Any update pls.

Qx/TL1 Prorocol - RTN910

Recommended answer

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

Qx/TL1 Prorocol - RTN910

Recommended answer

Third Party’s Trade Secret

My Followers