QoS in OSN 9800 U32
- x
- convention：
- Emotion(0)
|
Dear friend! The TNV3T220 does not support QoS, but the TNV3T220E supports QoS. For more information, see the following figure:
When you have a board that supports QoS installed on your device, you can set the rate limit for them. You can configure tunnel rate limit or PW bandwidth limit. The two modes of rate limiting are configured at different levels. The PW channel is contained in the tunnel channel. A tunnel is the server-layer channel of a PW, and a PW is the client-layer channel of a tunnel.
Thank you！ |
|
|
Dear friend! The TNV3T220 does not support QoS, but the TNV3T220E supports QoS. For more information, see the following figure:
When you have a board that supports QoS installed on your device, you can set the rate limit for them. You can configure tunnel rate limit or PW bandwidth limit. The two modes of rate limiting are configured at different levels. The PW channel is contained in the tunnel channel. A tunnel is the server-layer channel of a PW, and a PW is the client-layer channel of a tunnel.
Thank you！ |
|
liqiang185
Created Dec 6, 2021 12:28:14
(0)
(0)
https://forum.huawei.com/enterprise/en/mpls/thread/794229-875
liqiang185
Created Dec 6, 2021 12:30:10
(0)
(0)
Hi! The difference is that they are at different levels. |
Comment
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
