This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Enterprise
Community Forums Switches
Qinq in S3328TP-SI

Qinq in S3328TP-SI

Created: Dec 2, 2016 04:36:06Latest reply: Sep 15, 2018 23:43:49 1628 4 0 0
  Rewarded Hi-coins： 0 (problem resolved)
display all floors #1

I have a Switch 3328TP-SI and I want to configure Selective Qinq, I have the port in hybrid with its tagged and untagged vlan. When I set up the qinq vlan-translation enable and then the vlan-stacking port, all the tagged vlan stops working.

In summary when I enable the Selective Qinq all vlan tagged stop working. Is there a way to correct this on this switch?


In the switch I have Version 5.70 version (S3328 V100R006C05)


Example of configuration:

Ethernet Interface0 / 0/9

Qinq vlan-translation enable

  Port hybrid pvid vlan 3400

  Undo port hybrid vlan 1

  Port hybrid tagged vlan 1010 1091 to 1092 1120 3401

  Port hybrid untagged vlan 3400 3404

Port vlan-stacking vlan 3438 stack-vlan 3404


In this case all vlan 1010 1091 to 1092 1120 3401 stop working.


I also have a Switch 5300 V200R005C00SPC300 and here I do not have that problem.

  • x
  • convention：

I have this problem too (0) Favorite(0) Share Report
Featured Answers
Created Sep 15, 2018 23:43:49 Helpful(0) Helpful(0)

from the product documentation, there is a limitation for QinQ, if you have some VLAN that you don't want do the QinQ, you need to configure VLAN mapping command for these VLANs, like below:

port vlan-mapping vlan 1010 map-vlan 1010.
  • x
  • convention：
All Answers
gululu Admin Created Dec 2, 2016 09:52:32 Helpful(0) Helpful(0)

@zjwshenxian @owenqu @Lemon @撒么 please help！
  • x
  • convention：
Come on！
Jorge210488 Created Dec 14, 2016 19:58:19 Helpful(0) Helpful(0)

I think nobody has an answer or knows the solution Qinq in S3328TP-SI-2143373-1
  • x
  • convention：
pedroo Created Feb 19, 2018 13:37:23 Helpful(0) Helpful(0)

I have problem too
  • x
  • convention：
Martian_superman Created Sep 15, 2018 23:43:49 Helpful(0) Helpful(0)

from the product documentation, there is a limitation for QinQ, if you have some VLAN that you don't want do the QinQ, you need to configure VLAN mapping command for these VLANs, like below:

port vlan-mapping vlan 1010 map-vlan 1010.
  • x
  • convention：
Back to list

Reply

Reply
Advanced
B Color Image Link Quote Code Smilies
You need to log in to reply to the post Login | Register

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!

Login and enjoy all the member benefits

Login
Huawei Website Support About Huawei Privacy Terms of Use
Huawei Enterprise Huawei Carrier Forum Training & Certification

Copyright © 2019 Huawei Technologies Co., Ltd. All rights reserved.

Fast reply Scroll to top