A:
Two control boards are configured on the MA5680T. After the active control board is started normally, when the standby control board is started, an alarm is displayed, indicating that the MAC address of the standby control board is different from that of the active control board. This problem need not be solved manually. The standby control board restarts automatically, changes its MAC address to be the same as that of the active control board, and synchronizes all data with that of the active control board. This process takes approximately 20 minutes. From group: Transport&Access Network
Q&A: What precautions should be taken in the deployment of dual control boards of the MA5680T?
Created: Jul 18, 2018 14:41:53Latest reply: Jul 30, 2018 11:10:07
897
4
3
0
0
The post is synchronized to: Hot Topics
- x
- convention：
- Emotion(0)
Comment
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
