Hi, all!
Have a good day!
This topic describes the scenario and data for connecting a video wall to the typical network of the VCN500 to verify the function of playing video on the video wall.
To connect a video wall to the VCN500, you need to connect the VCN500 to the decoder and network keyboard.
Figure 1 Network diagram
First, we need to config the decoder
Open a web browser, type the IP address of a decoder in the address box, and press Enter.
Enter the decoder's user name and password.
Set the port parameters.
Choose Settings > Device Settings > Port Settings.
Set the port parameters.
Click Save.
Port settings are completed.
Set the client connection parameters.
Choose Settings > Network Configuration > Client Parameters.
Set the parameters.
Click Save.
The settings are completed.
Second, we will discuss Pushing video to the video wall.
After setting client connection parameters on the decoder web page, you can push video to a video wall or cancel the push on the eSpace IVS client.
Procedure
In the Service Operation panel on the left of the Workspace tab page, double-click Video Wall.
In the Decoder List panel on the Video Wall tab page, you can view the available decoders.
Create a video wall layout.
In the lower left of the Video Wall List panel, click
.Specify the video pane count in the text boxes next to New Layout in the upper right corner and click New Layout.
Drag decoders to video panes.
Click Save.
A new video wall layout is created.
Push video to the video wall.
NOTE: If you want to cancel the video push, right-click the video pane of the camera, and choose Video wall > Stop Video on Video Wall from the shortcut menu.
After playing video on the video wall, you can switch the video push mode to Preview on Video Wall, Preview and Push on Video Wall, or Push on Video Wall.
On the Live Feed tab page, click
.Select a camera whose live video will be pushed to the video wall.
View live video on the video wall.
This is all, thanks for reading!
