Push config xml config file into ont using cli.

wissal · Created Apr 30, 2020 15:27:28

Hello,
As far as I know, the XML of the ONT cannot be load directly from OLT when the U2000 is unavailable.

If you want to learn more details about how to modify the ONT configuration file through U2000, please refer to below case

https://support.huawei.com/carrier/docview!docview?nid=KB1000264673&path=PBI1-7275726/PBI1-7275738/PBI1-23709862/PBI1-22318685/PBI1-8952129/PBI1-8957539/PBI1-8957541/PBI1-21338691

Thanks

liqiang185 · Created Apr 30, 2020 15:02:32

Hello there!
There should be a certain command, you can check the command manual.

wissal · Created Apr 30, 2020 15:27:28

Hello,
As far as I know, the XML of the ONT cannot be load directly from OLT when the U2000 is unavailable.

If you want to learn more details about how to modify the ONT configuration file through U2000, please refer to below case

https://support.huawei.com/carrier/docview!docview?nid=KB1000264673&path=PBI1-7275726/PBI1-7275738/PBI1-23709862/PBI1-22318685/PBI1-8952129/PBI1-8957539/PBI1-8957541/PBI1-21338691

Thanks

junchang · Created May 3, 2020 09:43:16

Dear friend,

ont-load(diagnose)

Function

The ont-load command is used to load a program file or a configuration file for an optical network terminal (ONT), and clear the loaded data after a loading task is executed successfully. To upgrade an ONT through optical line terminal (OLT) or configure new ONT services, run this command.

The undo ont-load select command is used to delete an ONT loading list when the loading status is preparation, failure, or success. To clear an ONT list when the loading is not being executed, run this command.

Push config xml config file into ont using cli.

Recommended answer

ont-load(diagnose)

Function

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

Push config xml config file into ont using cli.

Recommended answer

ont-load(diagnose)

Function

Third Party’s Trade Secret

My Followers