Hi there.
It is planned to make a monitoring program, about 150 IP cameras, 4 million pixels, surrounding the monitoring poles on the main intersections of the factory, the entrances and exits of the buildings, and the aisles.
The equipment in the building is relatively concentrated. There may be more than 20 cameras in one building. Consider using two with 16 ports so that the cameras can be divided into two floors.
On the prosecution poles on the road outside, there may be 3-4 cameras on one pole, most of which are 2 cameras.
I want to make a POE solution.
Please recommend the equipment selection.
What we consider is the back-end selection MA5683T.
The front-end ONU is divided into 2 categories, 1 is indoor, we choose MA5626-16, which provides 16 interfaces.
There are not so many devices on the monitor pole, so the MA5671 is considered temporarily.
But now there are a few problems.
May I ask:
1. Can MA5626-16 carry 16 POE cameras?
2. MA5671 is a small-sized device, which is very suitable to be placed in the monitor pole, but it is powered by an adapter. I don't know if it supports POE. If it does not, please recommend a model.
3. Does MA5683T support multi-device protection? That is, I want to buy 2 sets to achieve hot backup.
4. How to design a better splitting ratio? What I am currently considering is that the MA5683T uses 1:16 splitting so that I can directly divide the building I need, and then add a splitter in the building (because some outdoor monitoring poles are relatively far away, they are not directly connected to the computer room. The optical fiber is directly connected to the annex building.)
Thank you.
