Procedure to configure alarms for ALMI/ALMO port
Created: 2 days 05:06Latest reply: Apr 19, 2022 06:21:55
68
9
0
0
0
Rewarded HiCoins：
0
(problem resolved)
Product : ATN910C-G
Version : V300R006
Dear All/Expert,
Does the configuration of different type of ports (GE/FE, ALMI/ALMO,ETH/OAM) is same or different based on the ports?
Lets say if I want to configure alarms using ALMI/ALMO port, does the configuration is same as for GE/FE port?
If it is different, can share on how to configure alarms for this ALMI/ALMO port?
Thank you,
- x
- convention：
- Emotion(0)
Featured Answers
rashdan_saadon
Created 2 days 06:24
(0)
(0)
Hi @fuzi_yao, As I check on Hedex, the "output alarm" command is supported only on the ATN 950D980C series and ATN 980B. You can refer to below link: https://support.huawei.com/hedex/pages/DOC1100734287AEJ1214E/05/DOC1100734287AEJ1214E/05/resources/command/8090/output-alarm.html?ft=0&fe=10&hib=8.1.5.2.1.66&id=EN-US_CLIREF_0000001102655932&text=output-alarm&docid=DOC1100734287 
fuzi_yao
Reply rashdan_saadon Created 2 days 06:36
(0)
(0)
I think it is supported, and I think the meaning in the document means that in the 950 and 980 series, only the 980 supports it. Maybe we can configure the command on the device to check whether the device supports the.
rashdan_saadon
Reply fuzi_yao Created 2 days 07:11
(0)
(0)
Okay understood, sorry for the misunderstanding. If customer want to configure external alarm device through the ALM/ALMO port of main control board, they can refer to this guide https://support.huawei.com/hedex/pages/DOC1100734287AEJ1214E/05/DOC1100734287AEJ1214E/05/resources/software/nev8r10_vrpv8r16/user/ne/dc_ne_dev_cfg_5010.html?ft=0&fe=10&hib=6.2.17.8&id=EN-US_TASK_0172361161&text=Configuring%2520the%2520Multi-level%2520Alarm%2520Boolean%2520Output&docid=DOC1100734287 i
fuzi_yao
Reply rashdan_saadon Created 2 days 07:23
(0)
(0)
Yes, just be careful. If you need to output alarm information to other devices, you need to use the Ops Assistant together.
|
All Answers
rashdan_saadon
Created 2 days 06:24
(0)
(0)
Hi @fuzi_yao, As I check on Hedex, the "output alarm" command is supported only on the ATN 950D980C series and ATN 980B. You can refer to below link: https://support.huawei.com/hedex/pages/DOC1100734287AEJ1214E/05/DOC1100734287AEJ1214E/05/resources/command/8090/output-alarm.html?ft=0&fe=10&hib=8.1.5.2.1.66&id=EN-US_CLIREF_0000001102655932&text=output-alarm&docid=DOC1100734287
fuzi_yao
Reply rashdan_saadon Created 2 days 06:36
(0)
(0)
I think it is supported, and I think the meaning in the document means that in the 950 and 980 series, only the 980 supports it. Maybe we can configure the command on the device to check whether the device supports the.
rashdan_saadon
Reply fuzi_yao Created 2 days 07:11
(0)
(0)
Okay understood, sorry for the misunderstanding. If customer want to configure external alarm device through the ALM/ALMO port of main control board, they can refer to this guide https://support.huawei.com/hedex/pages/DOC1100734287AEJ1214E/05/DOC1100734287AEJ1214E/05/resources/software/nev8r10_vrpv8r16/user/ne/dc_ne_dev_cfg_5010.html?ft=0&fe=10&hib=6.2.17.8&id=EN-US_TASK_0172361161&text=Configuring%2520the%2520Multi-level%2520Alarm%2520Boolean%2520Output&docid=DOC1100734287 i
fuzi_yao
Reply rashdan_saadon Created 2 days 07:23
(0)
(0)
Yes, just be careful. If you need to output alarm information to other devices, you need to use the Ops Assistant together.
|
Comment
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
