Hi!
I have problem with stacking two s5700 switches:
SW03 xg1/0/1 -------- SW04 xg1/0/1
Settings:
<sw03>display stack
Stack topology type: Link
Stack system MAC: 384c-4f3f-0bc1
MAC switch delay time: 1 min
Stack reserved vlan: 4093
Slot of the active management port: --
Slot Role Mac address Priority Device type
-------------------------------------------------------------
1 Master 384c-4f3f-0bc1 200 S5700-52X-LI-AC
<sw03>display stack channel
! : Port have received packets with CRC error.
L-Port: Logic stack port
P-Port: Physical port
Slot L-Port P-Port Speed State || P-Port Speed State L-Port Slot
-------------------------------------------------------------------------------
1 1/1 XGE1/0/1 10G UP -- -- -- -- --
-------------------------------------------------------------------------------
<sw03>
<sw03>display stack configuration
Current Slot-id Next Slot-id Current Priority Next Priority
--------------------------------------------------------------------
1 1 200 200
<sw03>
<sw03>display stack current-configuration
---------------current-configuration on slot 1 Begin---------------
stack enable
stack slot 0 renumber 1
stack slot 1 priority 200
stack reserved-vlan 4093
stack timer mac-address switch-delay 1
interface stack-port 1/1
port interface XGigabitEthernet1/0/1 enable
interface stack-port 1/2
---------------current-configuration on slot 1 End-----------------
<sw03>display stack peers
Slot# Port1 Peer1 Port2 Peer2
---------------------------------------------------------------------------
1 STACK 1 None STACK 2 None
<sw03>
<sw03>display stack port
*down : administratively down
Logic Port Phy Port Online Status
----------------------------------------------------------------------------
stack-port1/1 XGigabitEthernet1/0/1 present up
<sw03>
S5700-52X-LI-AC's Device status:
Slot Sub Type Online Power Register Status Role
-------------------------------------------------------------------------------
1 - S5700-52X-LI Present PowerOn Registered Normal Master
<sw03>
<sw-04>display stack
Stack topology type: Link
Stack system MAC: 94db-da5e-e3b7
MAC switch delay time: 1 min
Stack reserved vlan: 4093
Slot of the active management port: --
Slot Role Mac address Priority Device type
-------------------------------------------------------------
1 Master 94db-da5e-e3b7 100 S5700-52X-LI-AC
<sw-04>
<sw-04>display stack channel
! : Port have received packets with CRC error.
L-Port: Logic stack port
P-Port: Physical port
Slot L-Port P-Port Speed State || P-Port Speed State L-Port Slot
-------------------------------------------------------------------------------
1 1/1 XGE1/0/1 10G UP -- -- -- -- --
-------------------------------------------------------------------------------
<sw-04>
<sw-04>display stack configuration
Current Slot-id Next Slot-id Current Priority Next Priority
--------------------------------------------------------------------
1 1 100 100
<sw-04>
<sw-04>display stack current-configuration
---------------current-configuration on slot 1 Begin---------------
stack enable
stack slot 0 renumber 1
stack slot 1 priority 100
stack reserved-vlan 4093
stack timer mac-address switch-delay 1
interface stack-port 1/1
port interface XGigabitEthernet1/0/1 enable
interface stack-port 1/2
---------------current-configuration on slot 1 End-----------------
<sw-04>
<sw-04>display stack peers
Slot# Port1 Peer1 Port2 Peer2
---------------------------------------------------------------------------
1 STACK 1 None STACK 2 None
<sw-04>
<sw-04>display stack port
*down : administratively down
Logic Port Phy Port Online Status
----------------------------------------------------------------------------
stack-port1/1 XGigabitEthernet1/0/1 present up
<sw-04>
I've made reboot both sw03 and sw04 several times.