Preinstallation Failure Due to Improper File Permission?

tanglei · Created Jun 10, 2019 08:00:30

Hey!

Fault Locating

1. The preinstallation log (/tmp/fi-preinstall.log) is analyzed. The information displayed in the log is the same as the error message in the preceding screenshot, which indicates that the user has no permission to perform this operation.

2.The owner group of the /opt/FusionInsight_SetupTool file is checked, and it is found that the owner group is root:root. (For C60U20 and earlier versions, check the owner group of the /opt/FusionInsight file).

3.The preinstallation operation is performed on the OMS node. Checking the OMS node shows that the omm user does not run the privilege escalation script preset.sh.

Solution

1. Run the chown omm:wheel FusionInsight_SetupTool -R command in the opt directory to change the owner group. (In the case of C60U20 and earlier versions, run the chown omm:wheel/FusionInsight -R command).

2. Run the sh/opt/preset/preset.sh command (privilege escalation command) on the OMS node.

3. If there is the /tmp/fi-preinstall.lo file whose owner group is root, remove the file. Otherwise, the omm user has no write permission on the log.

4. Perform the preinstallation operation again.

tanglei · Created Jun 10, 2019 08:00:30

Hey!

Fault Locating

1. The preinstallation log (/tmp/fi-preinstall.log) is analyzed. The information displayed in the log is the same as the error message in the preceding screenshot, which indicates that the user has no permission to perform this operation.

2.The owner group of the /opt/FusionInsight_SetupTool file is checked, and it is found that the owner group is root:root. (For C60U20 and earlier versions, check the owner group of the /opt/FusionInsight file).

3.The preinstallation operation is performed on the OMS node. Checking the OMS node shows that the omm user does not run the privilege escalation script preset.sh.

Solution

1. Run the chown omm:wheel FusionInsight_SetupTool -R command in the opt directory to change the owner group. (In the case of C60U20 and earlier versions, run the chown omm:wheel/FusionInsight -R command).

2. Run the sh/opt/preset/preset.sh command (privilege escalation command) on the OMS node.

3. If there is the /tmp/fi-preinstall.lo file whose owner group is root, remove the file. Otherwise, the omm user has no write permission on the log.

4. Perform the preinstallation operation again.

wissal · Created Jun 10, 2019 08:01:20

Hello,
Common Faults in Preinstallation
Disk Formatting Failure Due to Insufficient Disks
Disk Formatting Failure Due to Insufficient Disk Space
Disk Formatting Failure Due to Inconsistent Swap Partition Statuses
Incorrect File Permissions Causing an OS Optimization Failure
RPM Package Installation Failure Due to Mismatched Versions
RPM Package Installation Fails Due to Insufficient Disk Space
Preinstallation Failure Due to Improper File Permission
Thanks

Preinstallation Failure Due to Improper File Permission?

Best answer

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

Preinstallation Failure Due to Improper File Permission?

Best answer

Third Party’s Trade Secret

My Followers