PRBS Test.

Hi User,

Purpose:
When routers are connected over a public network, the transmission quality affects service deployment and cutover. To address this problem, use the NMS to deliver a service connectivity test command after CES services are deployed on PWs. After the test is conducted, the device returns the test result to the NMS. This shortens service deployment.

Benefits:
PRBS tests offer the following benefits to carriers:
Monitors link quality during network cutover and helps identify potential risks, improving the cutover success ratio and minimizing user complaints about operator network issues.
Helps speed up service deployment and cutover on a network, shortening the service launch period.

Hello

BRPS is a very useful method to test the signal path availability and count the error 

BRPS acts as a tester , the board generates and send a continous stream in a specefic pattern from the local side , then there should be a loop in the other end .

the signal go and then return by the loop to the source board , the board check if the signal is the same as the signal sent and count the errors.

regards