So I have a router that is configured with 2 VLANs. One VLAN is reserved for GE0/0/0 which is connected to a switch, then to a few PCs whereas another VLAN is reserved for GE0/0/1 which is connected to an AP3030. Both VLANs are DHCP enabled. Question is, how can I configure the AP to work with the router's VLAN configuration ? What commands should I use to achieve that ? Is it possible to achieve that without the use of an AC ? Sorry I'm just a newbie with very limited knowledge.
Attachment: You need to log in to download or view. No account? Register
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
Politically sensitive content
Content concerning pornography, gambling, and drug abuse
Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."