Position transfer of the OptiX OSN 8800 equipment

liqiang185 · Created Jan 25, 2021 00:45:39

Hello,

1. Back up NE data before swapping, as described in Malik3000.

2. Back up the current alarms of NEs on the U2000 and compare the alarms after the migration. If there are new alarms, handle them in a timely manner.

3. Perform a protection switching test before the operation to ensure that the services transferred from this site can be switched to other routes.

4. If the NE is a gateway NE, it is recommended that the NMS be connected to the standby gateway NE.

Thanks!

Malik3000 · Created Jan 24, 2021 22:22:00

hi,

You need to upload NE data to the server .
also backup configuration and data to the server

for communication between NMS and NE nothing to be done , whenever you switch on the NE , it will work normally and reconnect with server

Giandiego · Created Jan 24, 2021 16:41:40

nice

Malik3000 · Created Jan 24, 2021 22:22:00

hi,

You need to upload NE data to the server .
also backup configuration and data to the server

for communication between NMS and NE nothing to be done , whenever you switch on the NE , it will work normally and reconnect with server

liqiang185 · Created Jan 25, 2021 00:45:39

Hello,

1. Back up NE data before swapping, as described in Malik3000.

2. Back up the current alarms of NEs on the U2000 and compare the alarms after the migration. If there are new alarms, handle them in a timely manner.

3. Perform a protection switching test before the operation to ensure that the services transferred from this site can be switched to other routes.

4. If the NE is a gateway NE, it is recommended that the NMS be connected to the standby gateway NE.

Thanks!

Position transfer of the OptiX OSN 8800 equipment

Best answer

Recommended answer

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

Position transfer of the OptiX OSN 8800 equipment

Best answer

Recommended answer

Third Party’s Trade Secret

My Followers