Portal authentication for wireless user(external portal server + Radius Server)

Latest reply: Dec 29, 2018 06:08:26 210 5 9 0

193706r1efe8x33rxc26du.png

1. Wireless User Association, get address

2. The client initiates the authentication request through the HTTP protocol.

3.chap (Challenge Handshake authentication Protocol, Challenge Handshake Verification Protocol) authentication interaction between the portal server and the access device.

4.Portal server encapsulates the user name and password entered by the user into the authentication request message sent to the access device.

5. Interaction between the access device and the authentication server for authentication messages.

6. The access device sends the authentication answer message to the Portal server. 

7.Portal server sends authentication to the client through the message, informing the client that the authentication was successful.

8.Portal server sends a certification response confirmation to the access device

  • x
  • convention:

yiyi0519
Created Dec 26, 2018 00:41:36 Helpful(0) Helpful(0)

from this case, the chap is better than PAP?
  • x
  • convention:

yiyi0519
Created Dec 26, 2018 00:43:12 Helpful(0) Helpful(0)

This case is a good example of the portal authentication process. There is a problem. If the portal page cannot be successfully pushed after the configuration is completed, where should I start troubleshooting this problem?
  • x
  • convention:

SupperRobin
Created Dec 29, 2018 03:09:26 Helpful(0) Helpful(0)

A user can access a known Portal authentication website and enter a user name and password for authentication. This mode is called active authentication. If a user attempts to access other external networks through HTTP, the device forcibly redirects the user to the Portal authentication website for Portal authentication. This mode is called forcible authentication.
  • x
  • convention:

Finn92
Created Dec 29, 2018 03:10:47 Helpful(0) Helpful(0)

Interaction between the access device and the authentication server for authentication messages.
The access device sends the authentication answer message to the Portal server.
Portal server sends authentication to the client through the message, informing the client that the authentication was successful.
good aritcal , thanks sharing .
  • x
  • convention:

Torrent
Created Dec 29, 2018 06:08:26 Helpful(0) Helpful(0)

1. Wireless User Association, get address

2. The client initiates the authentication request through the HTTP protocol.

3.chap (Challenge Handshake authentication Protocol, Challenge Handshake Verification Protocol) authentication interaction between the portal server and the access device.

4.Portal server encapsulates the user name and password entered by the user into the authentication request message sent to the access device.

thanks for sharing , we learned a lot.
  • x
  • convention:

Reply

Reply
You need to log in to reply to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Login and enjoy all the member benefits

Login and enjoy all the member benefits

Login