port translation in huawei USG6330

Popeye_Wang · Created Sep 9, 2020 12:25:34

Hi,
The NAT server is used for one-to-one mapping. To implement many-to-one or many-to-many mapping, you should use the destination NAT.

For example.

#

acl 3000

rule permit tcp destination x.x.x.x 0 destination-port range 20000 40000

#

firewall zone trust

destination-nat 3000 address y.y.y.y

#

For details, kindly refer to https://support.huawei.com/hedex/hdx.do?docid=EDOC1100122846&id=EN-US_CONCEPT_0178930882&lang=en

DDSN · Created Sep 9, 2020 08:37:13

Hi Yaqoob_kk,
For how to configure port range, you can refer to https://support.huawei.com/hedex/hdx.do?docid=EDOC1100122846&id=EN-US_CLIREF_0178943075&lang=en

I hope it helps!

hashaam · Created Sep 9, 2020 09:59:11

Dear what if we need to configure the port range, let suppose 30000-50000. I tried and found NAT server cannot map a port range for each configuration.

Kindly advise.

Popeye_Wang · Created Sep 9, 2020 12:25:34

Hi,
The NAT server is used for one-to-one mapping. To implement many-to-one or many-to-many mapping, you should use the destination NAT.

For example.

#

acl 3000

rule permit tcp destination x.x.x.x 0 destination-port range 20000 40000

#

firewall zone trust

destination-nat 3000 address y.y.y.y

#

For details, kindly refer to https://support.huawei.com/hedex/hdx.do?docid=EDOC1100122846&id=EN-US_CONCEPT_0178930882&lang=en

port translation in huawei USG6330

Recommended answer

Third Party’s Trade Secret

`@trans`bright_future`~trans`

My Followers

Enterprise

Consumer

Corporate

Carriers

port translation in huawei USG6330

Recommended answer

Third Party’s Trade Secret

`@trans`bright_future`~trans`

My Followers