port isolation

Popeye_Wang · Created Oct 23, 2019 08:19:56

Hi Hobbit,

To implement Layer 2 communication, you must delete port isolation.

If only Layer 3 interworking is required, you can change the port isolation mode to Layer 2 isolation and Layer 3 interworking.

port-isolate mode l2

Or use the ARP proxy to implement Layer 3 communication in the VLAN.

Popeye_Wang · Created Oct 23, 2019 08:19:56

Hi Hobbit,

To implement Layer 2 communication, you must delete port isolation.

If only Layer 3 interworking is required, you can change the port isolation mode to Layer 2 isolation and Layer 3 interworking.

port-isolate mode l2

Or use the ARP proxy to implement Layer 3 communication in the VLAN.

faisal.waheed · Created Oct 23, 2019 11:16:37

Posted by Popeye_Wang at 2019-10-23 08:19 Hi Hobbit, To implement Layer 2 communication, you must delete port isolation.If only Layer 3 inter ...

thanks for clarification.

Yehudi · Created Oct 30, 2019 03:00:08

Good. I've learned.

Unicef · Created Jul 27, 2021 09:24:57

Well done admin