Port Forwarding for FTP Server
- x
- convention：
- Emotion(0)
|
Hello, friend! Although port forwarding can be achieved, I think the following method is easier to meet your requirements because I did not know all about it at first. Log in to the web page as an administrator. In the navigation tree on the left, choose Network Applications > Home Storage (USB Application). In the pane on the right, set the parameters related to FTP downloading to share the FTP file of the ONT.
Configuration example: 1. Connect a USB cable to the ONT with a USB port. If "No USB Device" is displayed in the USB Device area, no USB device is found. Remove the USB cable and reinsert it. 2. Select Enable FTP Service and set User name and Password. 3. Choose Security > Device Access Control Configuration, select Enable LAN-side PC to access ONT through FTP, and Enable WAN-side PC to access ONT through FTP, and click Apply.
4. Enter ftp://192.168.100.1 in the address box to access the USB port. 192.168.100.1 is the management IP address of the ONT. I hope it helps you. Thanks! |
|
Chenxintao
Created Sep 6, 2020 05:44:52
(0)
(0)
1. Run the cmd command. 2. Run the ipconfig command to check the IP address of the local address. |
|
Hello, friend! Click Advanced Configuration > Forward Rules tab, and choose IPv4 Port Mapping. In the dialog box that is displayed, set the parameters related to port mapping
Generally, the default port number of the FTP server is 21. You can use the following links to configure port forwarding: |
Chenxintao
Reply Farjad Created Sep 6, 2020 13:12:38
(0)
(0)
When configuring port forwarding, you need to obtain not only the IP address of the USB port, but also the local port number and FTP port number 21.
Chenxintao
Reply Farjad Created Sep 6, 2020 14:11:39
(0)
(0)
Open the cmd and run the ipconfig command to view the IP address of the local host.
Chenxintao
Reply Farjad Created Sep 6, 2020 14:36:32
(0)
(0)
Hi, Do I need to check whether the FTP server is on the local end or on the peer end? Generally, no IP address is configured for the USB port. I have replied to the previous reply to check the IP address of the host. If you want to access the FTP server, you only need to forward the IP address and port number of the FTP server. If the local device is used, you can use the IP address of the ONT to configure port forwarding. If the configuration fails, please provide feedback. Thank you.
|
|
Hello, friend! Although port forwarding can be achieved, I think the following method is easier to meet your requirements because I did not know all about it at first. Log in to the web page as an administrator. In the navigation tree on the left, choose Network Applications > Home Storage (USB Application). In the pane on the right, set the parameters related to FTP downloading to share the FTP file of the ONT.
Configuration example: 1. Connect a USB cable to the ONT with a USB port. If "No USB Device" is displayed in the USB Device area, no USB device is found. Remove the USB cable and reinsert it. 2. Select Enable FTP Service and set User name and Password. 3. Choose Security > Device Access Control Configuration, select Enable LAN-side PC to access ONT through FTP, and Enable WAN-side PC to access ONT through FTP, and click Apply.
4. Enter ftp://192.168.100.1 in the address box to access the USB port. 192.168.100.1 is the management IP address of the ONT. I hope it helps you. Thanks! |
|
Comment
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
