Got it

Port Configuration for IP Phone and PC

Created: 3 days agoLatest reply: Apr 19, 2022 06:22:56 106 7 0 0 0
  HiCoins as reward: 0 (problem unresolved)
We are using Cisco phones connected with Huawei Switch S5735. However, we are facing that Authentucation Profile (dot1x) cannot be assigned on the port for PC through IP Phone. Rather assigning the forced access Vlan through PVID command.

Featured Answers

Recommended answer

Zonger
Created 2 days 02:38

Hi,

If an IP phone can obtain the voice VLAN through the network-policy TLV field of LLDP and the voice packet sent by the IP phone has a higher priority, you can configure the lldp tlv-enable med-tlv network-policy voice-vlan command on the switch to assign a voice VLAN to the IP phone, and configure the trusted packet priority on the interface to connect the IP phone to the network.

For applicable IP phones, see List of IP Phone Models That Can Be Connected to Switches.

https://support.huawei.com/enterprise/en/doc/EDOC1000131989?idPath=7919710


View more
  • x
  • convention:

Saqibaz
Saqibaz Created 2 days 06:23 (0) (0)
 
user_4373193
user_4373193 Created 2 days 18:08 (0) (0)
Sir, we assign static IPs to phone. In the case, should we apply this command in switch???  
Zonger
Zonger Reply user_4373193  Created 2 days 18:10 (0) (0)
Yes, if your IP phone is supported by Huawei switches  
All Answers
Hello! Thank you for contacting us.
We are working on an answer for you.
View more
  • x
  • convention:

Saqibaz
Saqibaz Created 2 days 06:23 (0) (0)
 

Hi,

If an IP phone can obtain the voice VLAN through the network-policy TLV field of LLDP and the voice packet sent by the IP phone has a higher priority, you can configure the lldp tlv-enable med-tlv network-policy voice-vlan command on the switch to assign a voice VLAN to the IP phone, and configure the trusted packet priority on the interface to connect the IP phone to the network.

For applicable IP phones, see List of IP Phone Models That Can Be Connected to Switches.

https://support.huawei.com/enterprise/en/doc/EDOC1000131989?idPath=7919710


View more
  • x
  • convention:

Saqibaz
Saqibaz Created 2 days 06:23 (0) (0)
 
user_4373193
user_4373193 Created 2 days 18:08 (0) (0)
Sir, we assign static IPs to phone. In the case, should we apply this command in switch???  
Zonger
Zonger Reply user_4373193  Created 2 days 18:10 (0) (0)
Yes, if your IP phone is supported by Huawei switches  
Good answer
View more
  • x
  • convention:

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.