This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Enterprise
Community Forums Switches
POE TO POE+ with maximum...

POE TO POE+ with maximum Volatage rating

Created: Jun 25, 2019 06:15:31Latest reply: Jun 27, 2019 00:46:41 126 3 0 0
  Rewarded Hi-coins： 0 (problem resolved)
display all floors #1

Hi All

I have a query


IN s5720 / s2700 switch i need to upgrade the inline power for end device .



1) What is the maximum voltage (POE+) / per port , that S5720 & S2700 can support

2) what is the configuration required to change the settings from POE to POE +, port wise

3) default voltage per port , of both the switch .


Regards


Yogendra Jain

  • x
  • convention：

I have this problem too (0) Favorite(0) Share Report
Featured Answers
chenhui
Admin Created Jun 27, 2019 00:46:41 Helpful(0) Helpful(0)

Posted by yogijain at 2019-06-25 07:03 Posted by Popeye_Wang at 2019-06-25 07:031.2. By default, the switch interfaces comply with 802.3at(P ...
hi, I checked, S5320 supports 802.3af(15.4w) and 802.3at(30w), and the the it's same for the S2700.
I think you can check if the PoE consumption has reached the maximum power that the s2700 could supply.
A device provides power for PDs in conformance to 802.3at(poe+) by default. if you changed it to poe, you could use command undo poe af-inrush enable to resotre the default setting.
  • x
  • convention：
Popeye_Wang
Admin Created Jun 25, 2019 06:57:33 Helpful(0) Helpful(0)

1.
POE TO POE+ with maximum Volatage rating-2977711-1

POE TO POE+ with maximum Volatage rating-2977711-2
2. By default, the switch interfaces comply with 802.3at(PoE+).
The poe af-inrush enable command changes the power supply standards of interfaces from 802.3at to 802.3af(PoE).
The poe { at-inrush | pre-bt-inrush | bt-inrush } enable command changes the power supply mode of interfaces supporting the 802.bt(PoE++) mode.

3. The default voltage is 48V DC.

This article contains more resources

You need to log in to download or view. No account?Register

x
  • x
  • convention：
All Answers
Popeye_Wang
Popeye_Wang Admin Created Jun 25, 2019 06:57:33 Helpful(0) Helpful(0)

1.
POE TO POE+ with maximum Volatage rating-2977711-1

POE TO POE+ with maximum Volatage rating-2977711-2
2. By default, the switch interfaces comply with 802.3at(PoE+).
The poe af-inrush enable command changes the power supply standards of interfaces from 802.3at to 802.3af(PoE).
The poe { at-inrush | pre-bt-inrush | bt-inrush } enable command changes the power supply mode of interfaces supporting the 802.bt(PoE++) mode.

3. The default voltage is 48V DC.

This article contains more resources

You need to log in to download or view. No account?Register

x
  • x
  • convention：
yogijain
yogijain MVE Created Jun 25, 2019 07:03:40 Helpful(0) Helpful(0)

Posted by Popeye_Wang at 2019-06-25 03:571.2. By default, the switch interfaces comply with 802.3at(PoE+).The poe af-inrush enable command  ...

Hi,
Thanks for  info  ,
Can you please  confirm the table shared is applicable for  all the switch starting from S2700  series ?

or for s2700  , is there different voltage rating
  • x
  • convention：
My%20name%20is%20Yogendra%20Jain%2C%20and%20I%20work%20as%20a%20Project%20Manager%20at%20Brightstar%20telecommunication%20India%20Limited.%20We%20are%20a%20top-ranking%205-star%20CSP%20%2F%20ASP%20Partner.I%20have%20more%20than%2013%20years%20of%20experience%20in%20the%20telecom%20domain.%20Working%20in%20the%20IP%20domain%20for%20the%20last%2010%20years%2C%20I%20participated%20in%20ISP%2C%20PSU%2C%20and%20governance%20projects%20using%20versatile%20OEMS%20products%20like%20Cisco%2C%20Brocade%2C%20Huawei%20and%20juniper.%20I%20have%20also%20been%20blessed%20with%20more%20than%2010%20technical%20certifications..and%20active%20member%20of%20Community%20since%20last%202%20yr
chenhui
chenhui Admin Created Jun 27, 2019 00:46:41 Helpful(0) Helpful(0)

Posted by yogijain at 2019-06-25 07:03 Posted by Popeye_Wang at 2019-06-25 07:031.2. By default, the switch interfaces comply with 802.3at(P ...
hi, I checked, S5320 supports 802.3af(15.4w) and 802.3at(30w), and the the it's same for the S2700.
I think you can check if the PoE consumption has reached the maximum power that the s2700 could supply.
A device provides power for PDs in conformance to 802.3at(poe+) by default. if you changed it to poe, you could use command undo poe af-inrush enable to resotre the default setting.
  • x
  • convention：
Back to list

Comment

Reply
Advanced
B Color Image Link Quote Code Smilies
You need to log in to reply to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Login and enjoy all the member benefits

Login and enjoy all the member benefits

Login
Huawei Website Support About Huawei Privacy Terms of Use
Huawei Enterprise Huawei Carrier Forum Training & Certification

Copyright © 2019 Huawei Technologies Co., Ltd. All rights reserved.

APP