Got it
Huawei Enterprise Support Community
Community Forums Access Network
packetfile update problem

packetfile update problem

Created: Aug 12, 2019 07:54:03Latest reply: Aug 24, 2019 03:08:33 945 11 0 0 0
  Rewarded HiCoins： 0 (problem resolved)
View the author 1#

hi dears,

I have loaded the new program file to MA5616 with CCUC control board and there is display version in the below.My question is what are the Area A and Area B in the display version output? And how can I load my device with the Area B program file.


TEST(config)#display version 

{ <cr>|backplane<K>|frameid/slotid<S><Length 1-15> }:

  Command:

          display version 

  VERSION : MA5616V800R310C00

  PATCH   : SPC100 SPH101 HP1101

  PRODUCT : MA5616

  Mainboard Running Area Information:

 --------------------------------------------

  Current Program Area : Area A

  Current Data Area : Area A

  Program Area A Version : MA5616V800R310C00

  Program Area B Version : MA5616V800R313C00

  Data Area A Version : MA5616V800R310C00

  Data Area B Version : MA5616V800R313C00


Like (0) Dislike (0) Favorite(0) Share Report
Previous: Mac filter problem
Next: [Getting to Know Wi-Fi 01] The Evolution of the Wi-Fi standards
Featured Answers

Best answer

(3) (0)
mehdi_noori
Created Aug 24, 2019 03:08:33

We solved this problem from boot menu.From boot process menu we did load the upgraded program file to box again and after rebooting the program file in both area has been the same.
View more
  • x
  • convention：

liqiang185
liqiang185 Created Aug 24, 2019 14:49:03 (0) (0)
I'm glad to hear your good news.  

Recommended answer

(0) (0)
Gavin.Liu
Created Aug 12, 2019 08:08:53

another area is for the roll back ， after 48 hours it will sync to same version by default .
View more
  • x
  • convention：

mohammad_mehdi
mohammad_mehdi Created Aug 12, 2019 08:42:36 (0) (0)
Is there any way for faster synchronizing?
and why I get the below failure,
TEST#rollback
Failure: Rollback function is disabled in current state  
Raheel_Ahmad
Raheel_Ahmad Created Aug 15, 2019 18:11:54 (0) (0)
12345y  
All Answers
(0) (0)
2#
Gavin.Liu
Gavin.Liu Created Aug 12, 2019 08:08:53

another area is for the roll back ， after 48 hours it will sync to same version by default .
View more
  • x
  • convention：

mohammad_mehdi
mohammad_mehdi Created Aug 12, 2019 08:42:36 (0) (0)
Is there any way for faster synchronizing?
and why I get the below failure,
TEST#rollback
Failure: Rollback function is disabled in current state  
Raheel_Ahmad
Raheel_Ahmad Created Aug 15, 2019 18:11:54 (0) (0)
12345y  
(0) (0)
3#
mohammad_mehdi
mohammad_mehdi Created Aug 12, 2019 08:41:28

Posted by Gavin.Liu at 2019-08-12 08:08 another area is for the roll back ， after 48 hours it will sync to same version by default .
Is there any way for faster synchronizing?
and why I get the below failure,
TEST#rollback
Failure: Rollback function is disabled in current state
View more
  • x
  • convention：
(0) (0)
4#
liqiang185
liqiang185 Admin Created Aug 16, 2019 13:54:23

Posted by mohammad_mehdi at 2019-08-12 08:41 Is there any way for faster synchronizing?and why I get the below failure,TEST#rollback Failure: ...
yes, can change the norollback time :
huawei#set norollback time
{ Options<E><active,standby> }:active
{ day<U><0,30> }:1
{ hour<U><0,23> }:2
{ minute<U><0,59> }:3

Command:
set norollback time active 1 2 3
View more
  • x
  • convention：

mehdi_noori
mehdi_noori Created Aug 20, 2019 17:22:25 (0) (0)
I checked there wasn't this command in the 5616 with CCUC  
(1) (0)
5#
mohammad_mehdi
mohammad_mehdi Created Aug 17, 2019 06:17:45

Posted by liqiang185 at 2019-08-16 13:54 yes, can change the norollback time :huawei#set norollback time ...
thanks for your help ,but when I use the rollback command in the MA5616 with CCUC control board I get the following
message
Failure: Rollback function is disabled in current state
so please help me about fixing this failure and how I enable or disable rollback in different state.
View more
  • x
  • convention：

user_2936791
user_2936791 Created Aug 19, 2019 03:18:35 (0) (0)
Hi,
I have this problem with MA5616 with CCUC control board  
mehdi_noori
mehdi_noori Created Aug 20, 2019 17:23:35 (0) (0)
Hi, I have this problem with MA5616 with CCUC  
(3) (0)
6#
mehdi_noori
mehdi_noori Created Aug 24, 2019 03:08:33

We solved this problem from boot menu.From boot process menu we did load the upgraded program file to box again and after rebooting the program file in both area has been the same.
View more
  • x
  • convention：

liqiang185
liqiang185 Created Aug 24, 2019 14:49:03 (0) (0)
I'm glad to hear your good news.  
Back to list

Comment

Advanced
B Color Image Link Quote Code Smilies
You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login
Huawei Website Support About Huawei Privacy User Agreement Terms of Use Cookies Cookie Settings
Huawei Enterprise Huawei Carrier Forum Training & Certification

Contact Us: e_online@huawei.com Copyright © 2022 Huawei Technologies Co., Ltd. All rights reserved.

APP

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.