other brand MCU integrate with Huawei SMC (Management).

Hello.

Please be informed that the main difference between adding another brand of MCU to the SMC and adding a Huawei MCU is that you can add it to the SMC either as management or unmanagement MCU. You can only add a manageable MCU to the SMC whose IP address you have obtained and also you can also upgrade it via the SMC management platform.

Also there is a management connection established between the MCU and SMC and you can query this connection status directly on the SMC platform.

You can find the configuration guide below on how to add a manageable MCU.

http://support.huawei.com/hedex/pages/EDOC1100016918SEE1219N/12/EDOC1100016918SEE1219N/12/resources/com/VI_cfgg_00001.html?ft=0&fe=10&hib=4.3.5.3.3&id=VI_cfgg_00001&text=Adding%20a%20Manageable%20MCU&docid=EDOC1100016918

In the below link there is the configuration guide on how to add a unmanageable MCU

http://support.huawei.com/hedex/pages/EDOC1100016918SEE1219N/12/EDOC1100016918SEE1219N/12/resources/SMC_cfgg/SMC_cfgg_00016.html?ft=0&fe=10&hib=4.3.5.3.4&id=SMC_cfgg_00016&text=Adding%20an%20Unmanageable%20MCU&docid=EDOC1100016918

A third option on how to add an MCU to the SMC platform is to add it as an auto-detected MCU. This mode applies especially when you must add an MCU whose IP address you do not know.

Here you will find the configuration guide:

http://support.huawei.com/hedex/pages/EDOC1100016918SEE1219N/12/EDOC1100016918SEE1219N/12/resources/SMC_cfgg/SMC_cfgg_00014.html?ft=0&fe=10&hib=4.3.5.3.2&id=SMC_cfgg_00014&text=Adding%20an%20Auto-Detected%20MCU&docid=EDOC1100016918

Please let me know if further information is required or if we can assist you with any other information.

What is the version of the SMC you have and VC topology you have

I meaning have VC solution of Huawei but I need to know if MCU other brand join integrate with SMC Huawei. What's losing feature benefit if not use MCU Huawei such as benefit of user, administrator, bussiness owner. I need information as above defend to procument for repeat order Huawei.

Thank a lot

What's difference MCU between cisco or polycom or huawei in case integrate with SMC Huawei.

SMC2.0 Networking with VP9000 Series MCUs
The SMC2.0 can work with VP9000 series MCUs, recording servers, HD videoconferencing endpoints, and telepresence systems using the IP connection type. (If the VP9660 or VP9650 MCUs are used, the ISDN connection type is also supported). Enterprise users can deploy MCUs, endpoints, and telepresence systems based on site requirements. The SMC2.0 manages MCUs, endpoints, and telepresence systems in a unified manner and can be used to schedule and control conferences.

Figure 2 shows the network where the SMC2.0 works with VP9000 series MCUs.
Figure 2 SMC2.0 networking with VP9000 series MCUs

The SMC2.0 manages MCUs and recording servers in a unified manner and allocates them based on the conference scheduling policy when scheduling conferences.
Users can schedule conferences on the SMC2.0. On endpoints, users can use SiteCall or dial the unified access number to initiate conferences.
After registering with an SC using both SIP and H.323, an MCU allows both SIP and H.323 endpoints to join the same conference.
During a conference, each participant can use continuous presence per port.
SMC2.0 Networking with ViewPoint 8000 Series and VP9000 Series MCUs
In this network, the MCU resource pool has both ViewPoint 8000 series and VP9000 series MCUs.
If a conference is held on a ViewPoint 8000 series MCU, participants enjoy conference experience provided by the ViewPoint 8000 series MCU. All participants view a fixed continuous presence layout provided by the MCU or are provided with certain fixed continuous presence layouts provided by the MCU. If a conference is held on a VP9000 series MCU, participants enjoy conference experience provided by the VP9000 series MCU. Participants are allowed to select desired continuous presence layouts on their endpoints.
The SMC2.0 selects the matching recording server based on the MCU where a conference is being held. The ViewPoint 8000 series MCUs work only with the recording server CR10. The VP9000 series MCUs can work with the recording servers RSE6500 and CR10. The RSE6500 is recommended.

Sir is your problem or inquiry has been solved

Sir is your problem or inquiry has been solved

I didn't post the question, but thanks for your answer. It's very complete and will be useful.

As always, very good answer @KarimUC . Just a comment: It will be useful to see the images/figures you mentioned