OSN1800 Cannot create ERPS ring
I have created all the logical fibers in and between all of the NE’s in the ring.
All the Och/OTU2/ODU2 are visible (bidirectional) in the WDM Trail manager.
There are no OTN related alarms in the ring.
All NE’s are synchronized in the NE configuration Data Manager.
I have assigned all the East and West ports and set the RPL Port in the main NE (HTS1018).
What can be the issue? I checked everything:(
- x
- convention：
- Emotion(0)
|
Dear friend! For the ERPS function, see the following restrictions:
https://support.huawei.com/hedex/hdx.do?docid=EDOC1100195059&id=EN-US_CONCEPT_0284341583&lang=en https://support.huawei.com/hedex/hdx.do?docid=EDOC1100195059&id=EN-US_CONCEPT_0284341589&lang=en If the problem persists after the preceding information is confirmed, Check whether the physical fiber is consistent with the logical fiber and whether the physical fiber connection is correct. Thank you! |
|
|
Dear friend! For the ERPS function, see the following restrictions:
https://support.huawei.com/hedex/hdx.do?docid=EDOC1100195059&id=EN-US_CONCEPT_0284341583&lang=en https://support.huawei.com/hedex/hdx.do?docid=EDOC1100195059&id=EN-US_CONCEPT_0284341589&lang=en If the problem persists after the preceding information is confirmed, Check whether the physical fiber is consistent with the logical fiber and whether the physical fiber connection is correct. Thank you! |
|
Comment
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
