Dear friend!
You are advised to check whether the NCE version supports the OptiX OSN 8800 V100R013. If the NCE version supports the OptiX OSN 8800 V100R013, log in to the NE through the Web LCT to check whether the upgrade is successful. If not, upgrade it again. If yes, delete the NE and add the NE again.
Supplement:
1. After the device is upgraded, the SCC board is automatically reset. It is recommended that you wait 15 to 20 minutes.
2. If you need to delete an NE and then create an NE again, it is risky. You are advised to back up data and perform this operation with caution.
Good luck!