Got it
Huawei Enterprise Support Community
Community Forums Transmission Network
OptiX OSN 8800 - GS4 boar...

OptiX OSN 8800 - GS4 board fault

Created: Apr 14, 2021 10:33:48Latest reply: Oct 8, 2021 17:50:53 452 10 1 0 0
  Rewarded HiCoins： 0 (problem resolved)
View the author 1#

Hei guys,


I have the following alarms on GS4 board: 

I did the fiber loop towards to the Port, but the alarms below wouldn’t be clear, even we hard-restart and unplug and insert again.

BoardType=TN54GS4


BarCode=022PPP10F6000012


Item=03022PPP

Description=Manufactured   Board,OptiX OSN 8800,TN54GS4,1*100G General Service Processing Board
   

1

Any suggestions for next step? 


Thank you :) 



Like (1) Dislike (0) Favorite(0) Share Report
Previous: OSN 1500 Backup
Next: What is the role of the VI and VO ports of the OAU1 board
Featured Answers

Best answer

(0) (0)
liqiang185
Admin Created Apr 14, 2021 11:18:08

According to your picture, the station reports the LOL alarm at the same time.


1. Ensure that the input optical power of the board is within the permitted range, and the type of actually received services is consistent with the configured service type (OTU4).


2. Check whether the service type supported by the optical module on the board matches with the type of actually received services. If a service type mismatch occurs, replace the optical module with an appropriated one.


View more
  • x
  • convention：
All Answers
(0) (0)
2#
chenhui
chenhui Admin Created Apr 14, 2021 10:34:14

Hello, dear.
It's nice to meet you in the community.
We're working on getting the right answer for you. Please rest assured that we'll be back with an answer shortly.
View more
  • x
  • convention：
(0) (0)
3#
liqiang185
liqiang185 Admin Created Apr 14, 2021 10:39:39

Dear friend! Please check whether the optical module of the equipment is firmly installed. Matches the properties of the peer interface.
Thank you!
View more
  • x
  • convention：

IA1995
IA1995 Created Apr 14, 2021 10:49:48 (0) (0)
Hello, The optical module should be fine, because this circuit was initially functional. We don't have engineer on site anymore.
The LED status is as below:
STAT Green
ACT Green
PROG Green
SRV Red  
liqiang185
liqiang185 Reply IA1995  Created Apr 14, 2021 10:56:26 (0) (0)
Have you configured protection for services, such as ASON or SNCP?  
IA1995
IA1995 Reply liqiang185  Created Apr 14, 2021 11:07:59 (0) (0)
No protection configured.  
(0) (0)
4#
liqiang185
liqiang185 Admin Created Apr 14, 2021 11:18:08

According to your picture, the station reports the LOL alarm at the same time.


1. Ensure that the input optical power of the board is within the permitted range, and the type of actually received services is consistent with the configured service type (OTU4).


2. Check whether the service type supported by the optical module on the board matches with the type of actually received services. If a service type mismatch occurs, replace the optical module with an appropriated one.


View more
  • x
  • convention：
(0) (0)
5#
joe_millan
joe_millan Created Apr 16, 2021 14:58:49

Thank you!
View more
  • x
  • convention：
(0) (0)
6#
joe_millan
joe_millan Created May 27, 2021 13:47:30

Thank you!
View more
  • x
  • convention：
(0) (0)
7#
Nabihazahid
Nabihazahid Created Oct 8, 2021 17:50:46

Good
View more
  • x
  • convention：
(0) (0)
8#
Nabihazahid
Nabihazahid Created Oct 8, 2021 17:50:53

Solved
View more
  • x
  • convention：
Back to list

Comment

Advanced
B Color Image Link Quote Code Smilies
You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login
Huawei Website Support About Huawei Privacy User Agreement Terms of Use Cookies Cookie Settings
Huawei Enterprise Huawei Carrier Forum Training & Certification

Contact Us: e_online@huawei.com Copyright © 2022 Huawei Technologies Co., Ltd. All rights reserved.

APP

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.