Optical power

liqiang185 · Created Jan 5, 2022 13:47:14

Honey is a friend!
According to the screenshot, the receive optical power of port 1 is normal because it is close to the reference value.
For other ports, you can refer to the value of port 1 although the reference value is not set.
The optical power of port 2 is normal.
The optical power of port 3 is too high. You are advised to add a 5 dB optical attenuator.
The optical power of port 4 is very low, and the optical power of port 6 is a little low. Therefore, you need to check the attenuation of the fiber link and whether the connector is loose.
Thank you!

liqiang185 · Created Jan 5, 2022 12:17:49

Dear friend!
Please rest assured that we'll be back with an answer shortly.

liqiang185 · Created Jan 5, 2022 13:47:14

Honey is a friend!
According to the screenshot, the receive optical power of port 1 is normal because it is close to the reference value.
For other ports, you can refer to the value of port 1 although the reference value is not set.
The optical power of port 2 is normal.
The optical power of port 3 is too high. You are advised to add a 5 dB optical attenuator.
The optical power of port 4 is very low, and the optical power of port 6 is a little low. Therefore, you need to check the attenuation of the fiber link and whether the connector is loose.
Thank you!

hpl_Panda · Created Jan 6, 2022 02:52:33

Good

user_4230563 · Created Jan 6, 2022 11:45:32

Thank you very much....

Optical power

Best answer

Recommended answer

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

Optical power

Best answer

Recommended answer

Third Party’s Trade Secret

My Followers