Hello, everyone!
This post enquires about an optical power problem on the HG8245 GPON. Please see more details as you read further down.
ISSUE DESCRIPTION
I have a big problem witch my GPON. This is 2000m cable + 2x split (1x8) and I don't know how I have this big optical fiber.
In the OLT I have C+ SC/UPC (blue) and ONT B+ SC/UPC (blue), but in my firstibution frame I have SC/APC (green). Why is OLT RX i too big? Thanks in advance for your replies on this optical power problem on the HG8245 GPON.
MA5680T(config-if-gpon-0/1)#display ont optical-info 0 1
-----------------------------------------------------------------------------
Module type : -
Module sub-type : -
Used type : -
Encapsulation Type : -
Optical power precision(dBm) : -
Vendor PN : -
Rx optical power(dBm) : -26.38
Rx power current warning threshold(dBm): [-,-]
Rx power current alarm threshold(dBm) : [-,-]
Tx optical power(dBm) : 2.31
Tx power current warning threshold(dBm): [-,-]
Tx power current alarm threshold(dBm) : [-,-]
Laser bias current(mA) : 26
Tx bias current warning threshold(mA) : [-,-]
Tx bias current alarm threshold(mA) : [-,-]
Temperature(C) : 54
Temperature warning threshold(C) : [-,-]
Temperature alarm threshold(C) : [-,-]
Voltage(V) : 3.300
Supply voltage warning threshold(V) : [-,-]
Supply voltage alarm threshold(V) : [-,-]
OLT Rx ONT optical power(dBm) : -29.59, out of range[-29.00, -7.00]
CATV Rx optical power(dBm) : -
CATV Rx power alarm threshold(dBm) : [-,-]
-----------------------------------------------------------------------------
