Optical power management : ALS function

Hi all,

Note that ALS function need to be activated on each port, in this way the laser will not harm anybody!

When a client-side or WDM-side fault occurs during the transmission of non-OTN services, the automatic laser shutdown (ALS) function, if being enabled, shuts down the laser(s) on the associated transmit ports. It turns on the laser(s) on the transmit port(s) again when the fault has been eliminated.
 
The automatic laser shutdown (ALS) function needs to be configured at each required port.
 
ALS application for OSN 8800

From group: Transport&Access Network

Thanks!