Got it

Open port on AR129CGVW-L

Created: Jul 19, 2018 07:43:46Latest reply: Jul 19, 2018 11:02:00 4464 4 0 0 0
  Rewarded HiCoins: 0 (problem resolved)

Hi, everyone!


This post enquires about the open port on AR129CGVW-L. Please see more details below.


Huawei AR129CGVW-L


ISSUE DESCRIPTION


I have a Mikrotik routerboard connected to my AR129CGVW-L. CCTV DVR is connected to Mikrotik. The route in Mikrotik is configured and can access AR129CGVW-L, but I cannot ping the Mikrotik from AR129CGVW-L.I also need to forward the port to the DVR so it can be accessible outside.


I appreciate any help related to the open port on AR129CGVW-L. Thanks!

  • x
  • convention:

Featured Answers
StarOfWest
Created Jul 19, 2018 11:02:00

Hello! 

It would be great if you could provide some extra details concerning the fault. I would like to enquire on the following points though:

1. What's the topology of the network? Mikrotik and Huawei routers are directly connected? 


2. I understand you can't ping Mikrotik from AR. How about the AR router from Mikrotik, can you ping it? 

3. Are you able to see the MAC address of the Mikrotik router being learned on the interface of the AR?
 
Please refer to the following command to finish this step:

display mac-address g0/0/1 \\\ use the interface number that connects to the Mikrotik.

Please see some additional details below:

4. Check whether there is an ARP entry learning on AR for the Mikrotik router.
 
Please see the following link, which shows you how to check the ARP entries:

5. Can you share the configuration of Huawei and Mikrotik? You can mask the private information.
 
To check the Huawei configuration, run 'display current' on the system view. Check here for details:
View more

Rating

Number of participants 1E-coins +10 Collapse Reasons
Iulian Iulian + 10 Awesome!

View All scores

  • x
  • convention:

All Answers
m80047048
m80047048 Created Jul 19, 2018 08:02:48

Please note that GE0/0/0 to GE0/0/3 on AR129CGVW-L can be changed from Layer 2 mode to Layer 3 mode.
Login to AR and run below command :

[Huawei] interface G0/0/1
[Huawei-Ethernet0/0/0] undo portswitch


Then You need to configure IP Address on G0/0/1:
[Huawei] interface G0/0/1
[Huawei - G0/0/1] ip address x.x.x.x

Note:
1-AR129CGVW-L do not support the VLANIF interface.
2-IP address on Mikrotik should be from same range of x.x.x.x
View more
  • x
  • convention:

andsta
andsta Created Jul 19, 2018 08:25:02

Hi,
In order to configure the port forwarding on the AR, please check the following link:
http://support.huawei.com/hedex/hdx.do?docid=EDOC1100007335&id=dc_cfg_sslvpn_1022&text=Example%252520for%252520Configuring%252520the%252520Port%252520Forwarding%252520Service&lang=en
Regarding the unreachability issue, you can share the device configuration here in order to have a better lookat the problem.
View more
  • x
  • convention:

walledgarden
walledgarden Created Jul 19, 2018 08:31:20

Posted by m80047048 at 2018-07-19 08:02 Please note that GE0/0/0 to GE0/0/3 on AR129CGVW-L can be changed from Layer 2 mode to Layer 3 mode. ...
interface G0/0/1 returned unrecognized command. I am new to Huawei router and I appreciate your help.
View more
  • x
  • convention:

StarOfWest
StarOfWest Created Jul 19, 2018 11:02:00

Hello! 

It would be great if you could provide some extra details concerning the fault. I would like to enquire on the following points though:

1. What's the topology of the network? Mikrotik and Huawei routers are directly connected? 


2. I understand you can't ping Mikrotik from AR. How about the AR router from Mikrotik, can you ping it? 

3. Are you able to see the MAC address of the Mikrotik router being learned on the interface of the AR?
 
Please refer to the following command to finish this step:

display mac-address g0/0/1 \\\ use the interface number that connects to the Mikrotik.

Please see some additional details below:

4. Check whether there is an ARP entry learning on AR for the Mikrotik router.
 
Please see the following link, which shows you how to check the ARP entries:

5. Can you share the configuration of Huawei and Mikrotik? You can mask the private information.
 
To check the Huawei configuration, run 'display current' on the system view. Check here for details:
View more

Rating

Number of participants 1E-coins +10 Collapse Reasons
Iulian Iulian + 10 Awesome!

View All scores

  • x
  • convention:

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.
Information Protection Guide
Thanks for using Huawei Enterprise Support Community! We will help you learn how we collect, use, store and share your personal information and the rights you have in accordance with Privacy Policy and User Agreement.