I am getting the error on a WLAN
2020-07-20 13:42:05 [00:57:C1:XX:XX:XX]-ATEL: HUAWEI(2.4G): eapol retry 2020-07-20 13:42:05 [00:57:C1:XX:XX:XX]-ATEL: HUAWEI(2.4G): CPE EAP reply 2020-07-20 13:42:05 [00:57:C1:XX:XX:XX]-ATEL: HUAWEI(2.4G): state WPA_PTKINITNEGOTIATING eapol type info 010a 2020-07-20 13:42:05 [00:57:C1:XX:XX:XX]-ATEL: HUAWEI(2.4G): check MIC fail 2020-07-20 13:42:06 [00:57:C1:XX:XX:XX]-ATEL: HUAWEI(2.4G): deauthenticate 15(4-way handshake timeout) 2020-07-20 13:42:06 [00:57:C1:XX:XX:XX]-ATEL: HUAWEI(2.4G): cleanup STA 0(Reserved)
Using the diagnose tool i got
| WLAN Information |
| 2.4G WLAN Status: | Enabled |
| Working Mode: | 802.11b/g/n |
| Channel check: | 13 |
| Frequency bandwidth mode: | Auto 20/40 MHz |
| Current working frequency bandwidth: | 20 MHz |
| Whitelist/Blacklist filtering: | Off |
| MAC address check: | OK |
| Difference of antenna signal strength: | RSSI difference between antennas is smaller than or equal to 10. |
| Calibration parameter: | Normal |
| SSID1Information |
| SSID Name: | ATEL: HUAWEI |
| Enable SSID: | Enabled |
| SSID broadcast: | Enabled |
| WMM Status: | Enabled |
| Encryption Mode: | TKIP&AES |
| Maximum number of connected wireless STAs: | 32 |
| Number of connected wireless STAs: | 0 |
| STA Information |
| 2.4G Number of connected wireless STAs: | 0 | |
| 2.4G Number of wireless STAs having weak signals: | 0 |
| Neighboring AP Information |
| Number of interference sources: | 0 | |
| Number of strong interference sources: | 0 |
if i go to WLAN configuration page and click apply (without any changes) i'm get able to connect to.
