Hi, everyone!
This post enquires about the issue with an ONT failed to configure on an MA5603T OLT. Please see more details below.
ISSUE DESCRIPTION
I'm having problems configuring an HG8240H ONT on a SmartX MA5603T OLT.
POSSIBLE SOLUTION
This is my configuration:
MA5603T#display current-configuration
{ <cr>|ont<K>|port<K>|section<K>|service-port<K>|simple<K>||<K> }:
Command:
display current-configuration
[MA5600V800R008: 5901]
#
[global-config]
<global-config>
traffic table ip index 16 name "inet_up_be_gpon" cir off priority 0
priority-policy local-setting
traffic table ip index 17 name "inet_dn_be_gpon" cir off priority 0
priority-policy local-setting
switch adsl mode to rfc2662 vdsl mode to tr129
trap convert event-to-alarm 0x3721000a
dba-profile add profile-id 10 profile-name "300M" type2 assure 329984
ont-profile add profile-id 100 profile-name "ONT" 1 1 1 1 2 4 14 1 0 0 0 0 32 1 8 1 8 8 8 8 8 8 8 8
ont-profile add profile-id 101 profile-name "HGU" 1 1 1 1 2 1 14 1 0 0 0 0 32 1 8 1 8 8 8 8 8 8 8 8
#
[device-config]
<device-config>
board add 0/5 H805GPBD
rack info 0 description "RACK-300" name "RACK-300" manufactured-name "Huawei"
system ex-mode backup
#
[public-config]
<public-config>
sysman service dbwin disable
sysman service msg-emulate disable
sysman service ssh-tl1 disable
sysman service telnet-tl1 disable
snmp-agent local-engineid 800007DB034CB16C712EAF
#
[vlan-config]
<vlan-config>
vlan 100 smart
vlan 600 to 601 smart
vlan 1000 smart
vlan desc 100 description "VLAN_TEST_CISCO"
vlan desc 1000 description "VLAN_TO_BRAS"
vlan attrib 1000 stacking
port vlan 100 0/6 0
port vlan 600 to 601 0/6 0
port vlan 1000 0/6 0
#
[vlan-srvprof]
<vlan-srvprof>
vlan service-profile profile-id 3 profile-name "perfil_CONECTIVIDAD"
rip tunnel enable
dhcp option82 disable
dhcp proxy disable
security anti-ipspoofing disable
commit
vlan bind service-profile 1000 profile-id 3
#
[gpon]
<gpon-0/5>
interface gpon 0/5
port 0 ont-auto-find enable
port 0 fec enable
ont add 0 0 password-auth hex "%8S6:L>\P:Q<80HM-]0AI:A!!Z<GCQB011>T2NE^VTHUNXQ!!%" always-on profile-id 100 desc "HG8240H" manage-mode omci
ont add 0 1 password-auth hex "%-9H9+UAN*6%4;<!F!)IR<Q!!Z<GCQB011>T2NE^VTHUNXQ!!%" always-on profile-id 101 desc "HGU_MITRASTAR" manage-mode omci
gemport add 0 gemportid 200-201 eth encrypt on
tcont modify-profile 0 0 0 profile-id 2
tcont bind-profile 0 0 10 profile-id 10
tcont modify-profile 0 1 0 profile-id 2
tcont bind-profile 0 1 10 profile-id 10
ont gemport bind 0 0 200 10 priority-queue 2
ont gemport bind 0 1 201 10 priority-queue 2
ont gemport mapping 0 0 200 vlan 600
ont gemport mapping 0 1 201 vlan 601
ont port vlan 0 0 eth 6 1 translation s-vlan 600
ont port vlan 0 1 eth 6 1 translation s-vlan 601
#
[port-config]
<port-config>
port desc 0/6/0 description "UPLINK"
#
[emu-config]
<emu-config>
emu add 0 fan 0 1 "H801FMCA"
#
[fan]
<fan-0>
interface emu 0
fan speed mode manual
fan speed adjust 0
#
[abs-config]
<abs-config>
config
#
[config]
<config>
mpls label start 8192
#
[prevlanif]
<prevlanif>
interface vlanif1
interface vlanif100
#
[vlanif]
<vlanif1>
interface vlanif1
ip address 192.168.50.1 255.255.255.0
arp proxy enable
#
<vlanif100>
interface vlanif100
ip address 172.26.0.2 255.255.255.0
#
[meth]
<meth0>
interface meth0
ip address 10.10.10.100 255.255.255.0 description "CONFIG_10.10.10.100"
#
[null]
<null0>
interface null0
#
[aaa]
<aaa>
aaa
authentication-scheme "default"
#
authorization-scheme "default"
#
accounting-scheme "default"
#
domain "default"
#
return
This is my ONT information:
MA5603T#display ont info 0 5 0 0
---------------------------------------------------------------------
F/S/P : 0/5/0
ONT-ID : 0
Control flag : active
Run state : online
Config state : failed
Match state : match
DBA type : SR
ONT distance(m) : 8
ONT battery state : -
Transparent : disable
MAC learning function: enable
Native VLAN option : concern
Ont profile ID : 100
Authentic type : password-auth
Discovery mode : always-on mode
SN : 00F2011000140521
Password : 0xF2011000140521000000
Management mode : OMCI
Isolation state : normal
ONT IP 0 address/mask: -
Description : HG8240H
Last down cause : re-register
Last up time : 2018-09-05 07:19+08:00
Last down time : 2018-09-05 07:19+08:00
Last dying gasp time : -
ONT online duration : 1hour 52minute 51second
Type-C Support : Not support
---------------------------------------------------------------------
----------------------------------------------
T-CONT-ID DBA-profile Alloc-ID
----------------------------------------------
0 2 0
10 10 2560
----------------------------------------------
MA5603T#diagnose
MA5603T(diagnose)%%display ont failed-configuration 0/5/0 0
----------------------------------------------------------------
ONT ID : 0
The number of failed config: 3
The type of failed config : Config ONT ethernet port attribute (25)
The index of failed config : 0
The cause of failed config : OMCI/OAM returns error (2)
The type of failed config : Config ONT ability (0)
The index of failed config : 6146
The cause of failed config : OLT processes fail (0)
The type of failed config : Config ONT ability (0)
The index of failed config : 0
The cause of failed config : OLT processes fail (0)
----------------------------------------------------------------
MA5603T(diagnose)%%
Can anyone help me understand why Config state fails?
Thanks in advance for assisting me in solving this issue with an ONT failed to configure on an MA5603T OLT.
M.
