ONT Configuration

Chenxintao · Created Oct 4, 2020 07:45:42

Hello, friend!

To configure the routing mode on the web page, you need to use the super account to log in to the web page. Generally, you need to perform the following steps:

1. Configure the upstream route WAN.

The operations include creating or modifying an existing WAN, enabling the WAN, selecting PPPoE/IPoE, selecting the routing mode, selecting the Internet service type, configuring the broadband VLAN/priority, entering the broadband account and password, binding LANx and SSID (if Wi-Fi is supported), enabling NAT, and enabling the DHCP service.

To configure a common non-customized ONT, choose WAN > WAN Configuration.

2. Configure the SSID for Wi-Fi access.

The operations include creating or modifying an existing SSID, configuring an SSI name, activating a connection, selecting an encryption mode, and configuring an authentication password.

To configure a common non-customized ONT, choose Wireless Network > Wireless Network Parameter Configuration > Basic Parameter Configuration (Enable Wireless Network).

To configure a customized ONT for China Telecom, choose Network > WLAN Settings > Wireless Basic Settings (Enable Wireless Network).

To configure an ONT customized for China Unicom, choose Basic Configuration > WLAN Configuration > Basic Parameter Configuration (Enable Wireless Network).

Thanks!

chenhui · Created Oct 4, 2020 07:42:08

Hi,
We've received your question, and we're processing on it already, kindly wait a second.

Chenxintao · Created Oct 4, 2020 07:45:42

Hello, friend!

To configure the routing mode on the web page, you need to use the super account to log in to the web page. Generally, you need to perform the following steps:

1. Configure the upstream route WAN.

The operations include creating or modifying an existing WAN, enabling the WAN, selecting PPPoE/IPoE, selecting the routing mode, selecting the Internet service type, configuring the broadband VLAN/priority, entering the broadband account and password, binding LANx and SSID (if Wi-Fi is supported), enabling NAT, and enabling the DHCP service.

To configure a common non-customized ONT, choose WAN > WAN Configuration.

2. Configure the SSID for Wi-Fi access.

The operations include creating or modifying an existing SSID, configuring an SSI name, activating a connection, selecting an encryption mode, and configuring an authentication password.

To configure a common non-customized ONT, choose Wireless Network > Wireless Network Parameter Configuration > Basic Parameter Configuration (Enable Wireless Network).

To configure a customized ONT for China Telecom, choose Network > WLAN Settings > Wireless Basic Settings (Enable Wireless Network).

To configure an ONT customized for China Unicom, choose Basic Configuration > WLAN Configuration > Basic Parameter Configuration (Enable Wireless Network).

Thanks!

ONT Configuration

Best answer

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

ONT Configuration

Best answer

Third Party’s Trade Secret

My Followers