ONT Config OMCI MA5608T

Dear user！

From what you've described, we can't get results.

You can view the following information about OMCI:

OMCI is a type of ITU-T Recommendation G.984.4-compliant configuration and transmission channel, which is used to transmit OMCI messages over dedicated ATM PVCs or GEM ports established between an OLT and an ONT. The OMCI messages are used for discovering ONTs for management and control.

Thank you!

found out what the problem is by the selection method.
not work this config:
ont ipconfig 0 0 ip-index 0 static ip-address 10.10.10.3 mask 255.255.255.0 gateway 10.10.10.1 Vlan 999
this config is work!
ont ipconfig 0 0 ip-index 1 static ip-address 10.10.10.3 mask 255.255.255.0 gateway 10.10.10.1 Vlan 999
why does not work with ipindex 0 did not understand.

Now the problem is that there is no ping to the wan ont address, my config:

dba-profile add profile-id 22 profile-name "UNLIM_200M" type3 assure 1024 max 204800
ont-srvprofile gpon profile-id 1 profile-name "ONT_STD0"
ont-port pots adaptive eth adaptive
port vlan eth 1 translation 999 user-vlan 999
commit
ont-lineprofile gpon profile-id 1 profile-name "ONT_STD_P0"
tr069-management enable
tr069-management ip-index 1
tcont 4 dba-profile-id 22
tcont 7
gem add 1 eth tcont 4
gem add 11 eth tcont 4
gem add 14 eth tcont 7
gem mapping 1 1 vlan 999
commit
quit
ont add 0 0 sn-auth "48575443D206BB59" omci ont-lineprofile-id 1
ont-srvprofile-id 1 desc "Test"
ont ipconfig 0 0 ip-index 1 dhcp vlan 999 priority 0

service-port 0 vlan 999 gpon 0/0/0 ont 0 gemport 11 multi-service user-vlan 999 tag-transform translate

Hello,

You have activated WAN port 1，but not 0.

If you do not use the command, WAN port 0 is used by default.

Thank you!

figured out, thanks. Works!