1. Telnet the ONT
2. Mirror port to the lan port (X indicate LAN port id , PON port may 6 or 10 ,please use command "set ethportmirror ?" check the pon port number and command format )
WAP>set ethportmirror sourceport 6 destport X mirrordate 2 enable 1
3. Connect PC to the lan port capture data with wireshark ,
4. Reproduce the issue
5. After finish the capture ,close the port mirror (X indicate LAN port id)
WAP>set ethportmirror sourceport 6 destport X mirrordate 2 enable 0
ONT capture step
Created: Nov 24, 2018 08:17:17Latest reply: Nov 24, 2018 09:08:19
533
1
0
0
0
- x
- convention：
- Emotion(0)
|
|
|
Comment
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
