Got it

OLT's Processing Power

Created: Jun 5, 2020 06:00:30Latest reply: Jun 5, 2020 06:24:58 394 2 24 0 0
  Rewarded HiCoins: 0 (problem resolved)

Hi there.


Help, solve the processing power of OLT MA5680, MA5683, MA5608, and how many users can be related to the board, opening, splitting ratio, or bandwidth.


Thanks.

Featured Answers

Recommended answer

Chenxintao
Admin Created Jun 5, 2020 06:24:58

Hello, friend!


Index MA5680T(ETSI)MA5680T(IEC)MA5683TMA5608T
Board Configuration

Control board: 2 slots 


Service board: 16 slots 


Universal interface board: one slot 


Upstream interface board: two slots 


Power interface board: two slots 

Control board: 2 slots 


Service board: slot 14 


Universal interface board: one slot 


Upstream interface board: two slots 


Power interface board: two slots 

Control board: 2 slots 


Service board: slot 6 


Universal interface board: one slot 


Upstream interface board: two slots 


Power interface board: two slots 

Control board: 2 slots 


Service board: 2 slots 


Power interface board: one or two slots 

MPU and switching capacity 

SCUN/SCUK: 480 Gbit/s (active/standby mode), 960 Gbit/s (load sharing mode)


SCUH/SCUV: 960 Gbit/s (active/standby mode), 1920 Gbit/s (load sharing mode)

MCUD/MCUD1/MCUE: 128 Gbit/s (active/standby mode), 256 Gbit/s (load sharing mode) 
Layer 2 packet forwarding rate SCUN/SCUK: 726 Mpps (active/standby mode), 1452 Mpps (load sharing mode) 


SCUH/SCUV: 1428 Mpps (active/standby mode), 2856 Mpps (load sharing mode) 

MCUD/MCUD1/MCUE: 190 Mpps (active/standby mode), 380 Mpps (load sharing mode) 
Switching and forwarding delay The forwarding delay is short. The 100 Mbit/s Ethernet port transmits a 64-byte Ethernet data packet with a delay of no more than 20 us. 
Bit error rate at full load When the port is fully loaded for transmission, the bit error rate (BER) is less than 10 e-7. 
System reliability specifications 

System: redundancy configuration 

System availability in typical configurations: > 99.999% 

Meantime between failures (MTBF) of the system (years): about 45 

Maximum number of GPON ports in a subrack 单框最大支持10G GPON接入端口数2562249632
Maximum number of 10G GPON ports in a subrack 单框最大支持EPON接入端口数1281124816
Maximum number of EPON ports in a subrack 单框最大支持10G EPON接入端口数256
2249632
Maximum number of 10G EPON access ports in a subrack 单框最大支持P2P FE接入端口数1281124816
Maximum number of P2P FE ports in a subrack 单框最大支持P2P GE接入端口数76867222896
Maximum number of P2P GE ports in a subrack 单框最大支持上行端口(GIU槽位GE)数76867222896
Maximum number of upstream ports (GE ports in the GIU slot) in a subrack4
44N/A
Maximum number of upstream ports (10GE ports in GIU slots) in a subrack444N/A
Maximum number of upstream ports (on the control board panel) in a subrack


SCUN/SCUK: 8*GE (load sharing) 


SCUH/SCUV: 8 x 10GE/GE (load sharing) 

MCUD/MCUE: 8 x GE (load sharing) 


MCUD1: 4 x GE + 2 x 10GE/GE (load sharing) 

Maximum number of ONUs supported by a subrack For Layer 2 applications, the maximum number of ONUs supported by a single subrack depends on the MAC addresses and traffic streams supported by the control board and is related to the MAC addresses and traffic streams planned for ONUs. 


For Layer 3 applications, the maximum number of ONUs supported by a single subrack depends on the routing specifications and ARP entry specifications supported by the control board


Thanks!

View more
  • x
  • convention:

All Answers
Hello, friend.
It's nice to meet you in the community.
We're working on your problem. Please be patient.
View more
  • x
  • convention:

Hello, friend!


Index MA5680T(ETSI)MA5680T(IEC)MA5683TMA5608T
Board Configuration

Control board: 2 slots 


Service board: 16 slots 


Universal interface board: one slot 


Upstream interface board: two slots 


Power interface board: two slots 

Control board: 2 slots 


Service board: slot 14 


Universal interface board: one slot 


Upstream interface board: two slots 


Power interface board: two slots 

Control board: 2 slots 


Service board: slot 6 


Universal interface board: one slot 


Upstream interface board: two slots 


Power interface board: two slots 

Control board: 2 slots 


Service board: 2 slots 


Power interface board: one or two slots 

MPU and switching capacity 

SCUN/SCUK: 480 Gbit/s (active/standby mode), 960 Gbit/s (load sharing mode)


SCUH/SCUV: 960 Gbit/s (active/standby mode), 1920 Gbit/s (load sharing mode)

MCUD/MCUD1/MCUE: 128 Gbit/s (active/standby mode), 256 Gbit/s (load sharing mode) 
Layer 2 packet forwarding rate SCUN/SCUK: 726 Mpps (active/standby mode), 1452 Mpps (load sharing mode) 


SCUH/SCUV: 1428 Mpps (active/standby mode), 2856 Mpps (load sharing mode) 

MCUD/MCUD1/MCUE: 190 Mpps (active/standby mode), 380 Mpps (load sharing mode) 
Switching and forwarding delay The forwarding delay is short. The 100 Mbit/s Ethernet port transmits a 64-byte Ethernet data packet with a delay of no more than 20 us. 
Bit error rate at full load When the port is fully loaded for transmission, the bit error rate (BER) is less than 10 e-7. 
System reliability specifications 

System: redundancy configuration 

System availability in typical configurations: > 99.999% 

Meantime between failures (MTBF) of the system (years): about 45 

Maximum number of GPON ports in a subrack 单框最大支持10G GPON接入端口数2562249632
Maximum number of 10G GPON ports in a subrack 单框最大支持EPON接入端口数1281124816
Maximum number of EPON ports in a subrack 单框最大支持10G EPON接入端口数256
2249632
Maximum number of 10G EPON access ports in a subrack 单框最大支持P2P FE接入端口数1281124816
Maximum number of P2P FE ports in a subrack 单框最大支持P2P GE接入端口数76867222896
Maximum number of P2P GE ports in a subrack 单框最大支持上行端口(GIU槽位GE)数76867222896
Maximum number of upstream ports (GE ports in the GIU slot) in a subrack4
44N/A
Maximum number of upstream ports (10GE ports in GIU slots) in a subrack444N/A
Maximum number of upstream ports (on the control board panel) in a subrack


SCUN/SCUK: 8*GE (load sharing) 


SCUH/SCUV: 8 x 10GE/GE (load sharing) 

MCUD/MCUE: 8 x GE (load sharing) 


MCUD1: 4 x GE + 2 x 10GE/GE (load sharing) 

Maximum number of ONUs supported by a subrack For Layer 2 applications, the maximum number of ONUs supported by a single subrack depends on the MAC addresses and traffic streams supported by the control board and is related to the MAC addresses and traffic streams planned for ONUs. 


For Layer 3 applications, the maximum number of ONUs supported by a single subrack depends on the routing specifications and ARP entry specifications supported by the control board


Thanks!

View more
  • x
  • convention:

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.