Got it
Huawei Enterprise Support Community
Community Forums Access Network
OLT POL FTTH

OLT POL FTTH

Created: Jan 21, 2022 06:17:19Latest reply: Jan 21, 2022 18:10:23 246 7 0 0 0
  Rewarded HiCoins： 0 (problem resolved)
View the author 1#
What is the difference in OLT configuration between FTTH and POL? What are those commands?

Like (0) Dislike (0) Favorite(0) Share Report
Previous: How to change your ONT password on the U2000
Next: Huawei ONT Basics(3)-Ports and Cable Connections
Featured Answers

Best answer

Recommended answer

(0) (0)
Chenxintao
Admin Created Jan 21, 2022 09:11:33

Hello, friend!


POL (Passive Optical LAN): a new LAN networking mode based on the PON technology. It optimizes the basic cabling and network structure of the LAN, making the network structure more flat and simple. Inherits the advantages of large bandwidth, high reliability, flattening, easy deployment, and easy management of the PON network. The POL network carries broadband, voice, video, Wi-Fi, CATV, and office services in a unified manner.


The POL solution is widely used in hotels, campuses, enterprise campuses, office buildings, electric power, and transportation scenarios.


The FTTH scenario refers to the fiber to the home scenario, which is also one of the application scenarios of the POL solution.



POL differs from traditional LANs in the following aspects:

  • In the POL networking, the aggregation switch in the traditional LAN is replaced by the OLT. Copper lines are replaced by optical fibers. The access switch is replaced by a passive optical splitter.

  • The ONU provides Layer 2/Layer 3 functions and accesses data, voice, and video services through wired or wireless access.


The configuration of the OLT is the same in both POL and FTTH scenarios. For details, see:


Everything about how to configure MA5608T


Thanks!


View more
  • x
  • convention：

Vlada85
Vlada85 Created Jan 21, 2022 10:59:23 (0) (0)
My question is are there any configuration differences on the OLT? That is, the configuration on OLT is the same for both POL and FTTH solutions?  
Chenxintao
Chenxintao Reply Vlada85  Created Jan 21, 2022 12:41:52 (0) (0)
Hi, dear!
The FTTH scenario is one of the POL solutions.
The OLT configurations are the same.  
Vlada85
Vlada85 Reply Chenxintao  Created Jan 21, 2022 14:04:10 (0) (0)
For POL solution, do I need to activate the STP protocol? I don't use that for FTTH.  
Chenxintao
Chenxintao Reply Vlada85  Created Jan 22, 2022 01:20:43 (0) (0)
Hi, dear!
STP is rarely used on the OLT. If STP is planned for the network scenario and service, STP can be configured.  
All Answers
(0) (0)
2#
Chenxintao
Chenxintao Admin Created Jan 21, 2022 06:25:48

Hi dear we are working on it.
View more
  • x
  • convention：
(0) (0)
3#
Chenxintao
Chenxintao Admin Created Jan 21, 2022 09:11:33

Hello, friend!


POL (Passive Optical LAN): a new LAN networking mode based on the PON technology. It optimizes the basic cabling and network structure of the LAN, making the network structure more flat and simple. Inherits the advantages of large bandwidth, high reliability, flattening, easy deployment, and easy management of the PON network. The POL network carries broadband, voice, video, Wi-Fi, CATV, and office services in a unified manner.


The POL solution is widely used in hotels, campuses, enterprise campuses, office buildings, electric power, and transportation scenarios.


The FTTH scenario refers to the fiber to the home scenario, which is also one of the application scenarios of the POL solution.



POL differs from traditional LANs in the following aspects:

  • In the POL networking, the aggregation switch in the traditional LAN is replaced by the OLT. Copper lines are replaced by optical fibers. The access switch is replaced by a passive optical splitter.

  • The ONU provides Layer 2/Layer 3 functions and accesses data, voice, and video services through wired or wireless access.


The configuration of the OLT is the same in both POL and FTTH scenarios. For details, see:


Everything about how to configure MA5608T


Thanks!


View more
  • x
  • convention：

Vlada85
Vlada85 Created Jan 21, 2022 10:59:23 (0) (0)
My question is are there any configuration differences on the OLT? That is, the configuration on OLT is the same for both POL and FTTH solutions?  
Chenxintao
Chenxintao Reply Vlada85  Created Jan 21, 2022 12:41:52 (0) (0)
Hi, dear!
The FTTH scenario is one of the POL solutions.
The OLT configurations are the same.  
Vlada85
Vlada85 Reply Chenxintao  Created Jan 21, 2022 14:04:10 (0) (0)
For POL solution, do I need to activate the STP protocol? I don't use that for FTTH.  
Chenxintao
Chenxintao Reply Vlada85  Created Jan 22, 2022 01:20:43 (0) (0)
Hi, dear!
STP is rarely used on the OLT. If STP is planned for the network scenario and service, STP can be configured.  
(0) (0)
4#
Saqibaz
Saqibaz Created Jan 21, 2022 18:10:23

Hello, @Vlada85



POL (Passive Optical LAN): a new LAN networking mode based on the PON technology. It optimizes the basic cabling and network structure of the LAN, making the network structure more flat and simple. Inherits the advantages of large bandwidth, high reliability, flattening, easy deployment, and easy management of the PON network. The POL network carries broadband, voice, video, Wi-Fi, CATV, and office services in a unified manner.



The POL solution is widely used in hotels, campuses, enterprise campuses, office buildings, electric power, and transportation scenarios.



The FTTH scenario refers to the fiber to the home scenario, which is also one of the application scenarios of the POL solution.





POL differs from traditional LANs in the following aspects:

In the POL networking, the aggregation switch in the traditional LAN is replaced by the OLT. Copper lines are replaced by optical fibers. The access switch is replaced by a passive optical splitter.

The ONU provides Layer 2/Layer 3 functions and accesses data, voice, and video services through wired or wireless access.



The configuration of the OLT is the same in both POL and FTTH scenarios. For details, see:



Everything about how to configure MA5608T



Thanks!
View more
  • x
  • convention：
Back to list

Comment

Advanced
B Color Image Link Quote Code Smilies
You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login
Huawei Website Support About Huawei Privacy User Agreement Terms of Use Cookies Cookie Settings
Huawei Enterprise Huawei Carrier Forum Training & Certification

Contact Us: e_online@huawei.com Copyright © 2022 Huawei Technologies Co., Ltd. All rights reserved.

APP

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.