Got it
Huawei Enterprise Support Community
Community Forums Access Network
OLT MA5608T rebooting

OLT MA5608T rebooting

Created: Apr 6, 2020 16:40:29Latest reply: Apr 7, 2020 01:13:51 845 2 1 0 0
  Rewarded HiCoins： 0 (problem resolved)
View the author 1#

Hi dears, How are you? I hope be fine!


I have an OLT MA5608T that is rebooting without stopping. When analyzing the logs, I noticed the following message:


Testing Flash memory...

 

There is no available program or data,reload your system......


I believe it is the lack of a file in the flash memory. Can you help me?



 Copyright (c) 1998 - 2016 by Huawei Technologies Co.,Ltd.

 All Rights Reserved.


 The last update date of base BIOS A is : Nov 29 2016 09:56:14


 ===============================================================

 BOARD INFORMATION : 

   CPU: E500 : Unknown system version.  Processor #1.(Rev 5.01) running at 1200Mhz

   1024M bytes DDR(ECC), 256M bytes flash installed on board

   Baudrate of serial channel is 9600bps

   Board's LAN IP address is 10.151.151.2

   Board's LAN Subnet mask is 255.255.255.252

   Board's LAN MAC address is F8:98:EF:30:78:61

 ===============================================================



 Base BIOS version is 131 


 Press <D> in 3 seconds to download extended BIOS    3 2 1 0



 Check Spare extended BIOS...OK


 Auto select default mode -- load BIOS from spare BIOS area.



 Sync extended bios from spare area ...OK


 Save extended BIOS disable start flag...OK!


 Transferring control to the extended BIOS ...OK!

pro


 Platform System start ...


 Press 'Ctrl+T' to stop auto-boot

 Memory Data Bus Test .................pass.

 Memory Address Bus Test ..............pass.


 Trace code : 0x10150500


 Copy from ROM to RAM       ...... OK!


 Uncompress from ROM to RAM ...... OK!


 Update fpga...OK.


 Copyright (c) 1998 - 2016 by Huawei Technologies Co.,Ltd.

 All Rights Reserved.


 The last update date of base BIOS B is : Nov 29 2016 09:56:14


 ===============================================================

 BOARD INFORMATION : 

   CPU: E500 : Unknown system version.  Processor #1.(Rev 5.01) running at 1200Mhz

   1024M bytes DDR(ECC), 256M bytes flash installed on board

   Baudrate of serial channel is 9600bps

   Board's LAN IP address is 10.151.151.2

   Board's LAN Subnet mask is 255.255.255.252

   Board's LAN MAC address is F8:98:EF:30:78:61

 ===============================================================



 Base BIOS version is 131 


 Press <D> in 3 seconds to download extended BIOS    3 2 1 0



 Check Spare extended BIOS...OK


 Auto select default mode -- load BIOS from spare BIOS area.



 Sync extended bios from spare area ...OK


 Save extended BIOS disable start flag...OK!


 Transferring control to the extended BIOS ...OK!

pro


 Platform System start ...


 Press 'Ctrl+T' to stop auto-boot

 Memory Data Bus Test .................pass.

 Memory Address Bus Test ..............pass.


 Trace code : 0x10150500


 Copy from ROM to RAM       ...... OK!


 Uncompress from ROM to RAM ...... OK!


 Update fpga...OK.


 Copyright (c) 1998 - 2016 by Huawei Technologies Co.,Ltd.

 All Rights Reserved.


 The last update date of base BIOS A is : Nov 29 2016 09:56:14


 ===============================================================

 BOARD INFORMATION : 

   CPU: E500 : Unknown system version.  Processor #1.(Rev 5.01) running at 1200Mhz

   1024M bytes DDR(ECC), 256M bytes flash installed on board

   Baudrate of serial channel is 9600bps

   Board's LAN IP address is 10.151.151.2

   Board's LAN Subnet mask is 255.255.255.252

   Board's LAN MAC address is F8:98:EF:30:78:61

 ===============================================================


Like (1) Dislike (0) Favorite(0) Share Report
Previous: How Do I Configure LLDP
Next: Accessing a echolife dn8245w router
Featured Answers

Best answer

(1) (0)
Chenxintao
Admin Created Apr 7, 2020 01:13:51

Hello, friend! 


About the problem you described. 


If the problem is caused by incorrect configuration or system, you can only solve the problem by re-importing the database file. 

1. Import the database file using the U2000. 

On the U2000, check whether the backup data exists. If yes, import the data file to the database and restart the device. 

If the database file is not backed up, apply for an empty database file from the device provider. The version of the database file must be the same as that of the device. After the empty database file is imported, the device configuration is lost. In this case, you need to reconfigure the OLT MA5608T according to the new device. 


2. Import the database file in BIOS mode. 

Similar to importing an empty database file to the U2000, the database file version must be the same as the device version and the device needs to be configured again. 


If the fault persists, the hardware may be faulty, You are advised to contact the device provider for a solution.

 

Thank you.


View more
  • x
  • convention：

Recommended answer

(0) (0)
wissal
MVE Created Apr 6, 2020 18:17:47

Hello,
Please follow the link below to get the desired information
https://support.huawei.com/hedex/hdx.do?lib=EDOC100017162531180AKK&docid=EDOC1000171625&lang=en&v=04&tocLib=EDOC100017162531180AKK&tocV=04&id=tc_6222&tocURL=resources%2ftrouble%2ftc%5f6416%2ehtml&p=t&fe=1&ui=3&keyword=olt%252Brebooting
Thanks
View more
  • x
  • convention：
All Answers
(0) (0)
2#
wissal
wissal MVE Created Apr 6, 2020 18:17:47

Hello,
Please follow the link below to get the desired information
https://support.huawei.com/hedex/hdx.do?lib=EDOC100017162531180AKK&docid=EDOC1000171625&lang=en&v=04&tocLib=EDOC100017162531180AKK&tocV=04&id=tc_6222&tocURL=resources%2ftrouble%2ftc%5f6416%2ehtml&p=t&fe=1&ui=3&keyword=olt%252Brebooting
Thanks
View more
  • x
  • convention：
(1) (0)
3#
Chenxintao
Chenxintao Admin Created Apr 7, 2020 01:13:51

Hello, friend! 


About the problem you described. 


If the problem is caused by incorrect configuration or system, you can only solve the problem by re-importing the database file. 

1. Import the database file using the U2000. 

On the U2000, check whether the backup data exists. If yes, import the data file to the database and restart the device. 

If the database file is not backed up, apply for an empty database file from the device provider. The version of the database file must be the same as that of the device. After the empty database file is imported, the device configuration is lost. In this case, you need to reconfigure the OLT MA5608T according to the new device. 


2. Import the database file in BIOS mode. 

Similar to importing an empty database file to the U2000, the database file version must be the same as the device version and the device needs to be configured again. 


If the fault persists, the hardware may be faulty, You are advised to contact the device provider for a solution.

 

Thank you.


View more
  • x
  • convention：
Back to list

Comment

Advanced
B Color Image Link Quote Code Smilies
You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login
Huawei Website Support About Huawei Privacy User Agreement Terms of Use Cookies Cookie Settings
Huawei Enterprise Huawei Carrier Forum Training & Certification

Contact Us: e_online@huawei.com Copyright © 2022 Huawei Technologies Co., Ltd. All rights reserved.

APP

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.