Some faults on the live network must be reported to Huawei R&D engineers for rectification. If information is collected during fault location in an earlier phase, the information can help maintenance personnel to locate the fault, which improves fault location precisely. This slide provides public information.
Command | Description |
display current-configuration | Queries settings that take effect in the system. |
display board 0 | Queries a board's status to check whether the board is working properly. |
display patch all | Queries the version, number, and type of patches loaded to the system. |
display io-packetfile information | Queries the board software package loaded to the system's flash memory. |
display data sync state | Queries the synchronization status of data on the active and standby control boards (configuration data, basic running data, and dynamic service data). |
display language | Queries the multi-language supported by the system and system versions. |
display cpu 0/9 (0/10) | Queries the CPU usage on the control board. |
(diagnose)%%display task | Queries all the tasks in the system. |
(diagnose)%%display reboot-record active/standby | Queries the resetting records on the active or standby control board. |
(su)%%display system all | Queries all the system-level debugging information. |
display alarm/event history all | Queries the alarm or event historical records. |
display log all | Queries all the operation records. |
(diagnose)%%display reset-record | Queries the resetting records of all the boards. |
(su)%%display msginfo | Queries the general information about, and corrupted unit, hung unit, and lifecycle period statistics of messages. |
(su)%%display lastwords | Queries the last words. |
This post was last edited by GongXiaochuan at 2018-12-10 08:06.
