OLT couldn't set IP to ONU

Hello, dear!
It's nice to meet you in the community.
We're working on your problem. Please be patient.

Hello, friend!

The router is connected to the OLT in your networking, and the OLT is connected to the ONU?

Can you provide the MA5608T version, ONU model, and the city where you are located?

Thanks!

Hello, friend!

Can you provide your configuration?

Maybe I need to understand from your configuration that the configuration didn't work.

Thanks!

Thank you very much for your reply.

To make is simplier, I just want to ping to ONU from OLT side. But I cannot do for some reason. IP did not even update on ONU side. However, I can add, see optical info and reset remotely from OLT side.

OLT - MA5608T

ONU - EG8141A5

OLT Firmware info

MA5608T(config)#display version
{ <cr>|backplane<K>|frameid/slotid<S><Length 1-15> }:

  Command:
          display version

  VERSION : MA5600V800R015C00
  PATCH   : SPC100
  PRODUCT : MA5608T

  Active Mainboard Running Area Information:
  --------------------------------------------------
  Current Program Area : Area B
  Current Data Area : Area A

  Program Area A Version : MA5600V800R015C00
  Program Area B Version : MA5600V800R015C00

  Data Area A Version : MA5600V800R015C00
  Data Area B Version : MA5600V800R015C00
  --------------------------------------------------

  Uptime is 0 day(s), 3 hour(s), 3 minute(s), 43 second(s)

OLT Configuration

MA5608T(config)#display current-configuration
{ <cr>|ont<K>|port<K>|section<K>|service-port<K>|simple<K>||<K> }:

  Command:
          display current-configuration
[MA5600V800R015: 5800]
#
[sysmode]
  <sysmode>
 switch adsl mode to rfc2662 vdsl mode to tr129
 xpon mode switch-to profile-mode
 voice-spec set vag-num 8
 voice-spec set sip-account-num 2048
 protocol support h248
 system ex-mode backup
 router mode basic
#
[global-config]
  <global-config>
 terminal user name buildrun_new_password root *J$1a$\9(r$*w0VR$4.Ix=|@=T=*{[{
U1\G("/PDA&4-x]HTW98VD!_qI$* 7 0000:00:00:00:00:00 0000:00:00:00:00:00 root 1 " -----" 0
 dba-profile add profile-id 20 profile-name "dba-profile_20" type3 assure 1024  max 2048
 ont-lineprofile gpon profile-id 0 profile-name "line-profile_default_0"
  tcont 0 dba-profile-id 2
  tcont 1 dba-profile-id 0
  commit
  quit
 ont-lineprofile gpon profile-id 10 profile-name "line-profile_10"
  tcont 4 dba-profile-id 20
  gem add 11 eth tcont 0
  gem add 12 eth tcont 4
  gem mapping 11 0 vlan 8
  commit
  quit
#
[device-config]
  <device-config>
 board add 0/1 H805GPFD
 board add 0/4 H801MPWD
#
[public-config]
  <public-config>
 snmp-agent local-engineid 800007DB038038xxxxxxxxx
#
[vlan-config]
  <vlan-config>
 vlan 8 smart
 vlan priority 8 6
 port vlan 8 0/2 0
#
[mcu]
  <mcu-0/2>
interface mcu 0/2
 speed 0 1000
 speed 1 1000
 speed 2 1000
 speed 3 1000
#
[gpon]
  <gpon-0/1>
 interface gpon 0/1
 port 0 ont-auto-find enable
 ont add 0 1 sn-auth "48575443xxxxxxxx" omci ont-lineprofile-id 10
ont-srvprofile-id 0 desc "ONT_NO_DESCRIPTION"
 ont ipconfig 0 1 static ip-address 192.168.x.x mask 255.255.x.x vlan 8
priority 5 gateway 192.168.x.x
#
[emu-config]
  <emu-config>
 emu add 0 fan 0 1  "H831FCBB"
 emu add 1 h801pmu 0 0  "H801PMUB"
#
[bbs-config]
  <bbs-config>
 service-port 0 vlan 8 gpon 0/1/0 ont 1 gemport 11 multi-service user-vlan 8
tag-transform translate inbound traffic-table index 6 outbound traffic-table
index 6
#
[config]
  <config>
 mpls label start 8192
#
[prevlanif]
  <prevlanif>
 interface vlanif8
#
[vlanif]
  <vlanif8>
interface vlanif8
 ip address 192.168.x.x 255.255.xxx.x
#
[meth]
  <meth0>
interface meth0
 ip address 10.11.x.x 255.255.x.x
#
[null]
  <null0>
interface null0
#
[aaa]
  <aaa>
aaa
 authentication-scheme "default"
 #
 authorization-scheme "default"
 #
 accounting-scheme "default"
 #
 domain "default"
 #
[post-system]
  <post-system>
 undo ssh server compatible_ssh1x
 ssh user root authentication-type password
#
return

I just want ONU to assign an IP in first step, then try to assign IP from Mikrotik in next step. But I'm stuck in first step :(

Thanks in advanced!

I followed this guide but I can't ping to ONU

https://info.support.huawei.com/AccessInfoTool/fttxSGTool_E/en/OneStep/onestep/topics/cfg_cli_fttx_cp01.html

Thanks in advanced!

Any help please?

I tried following this tutorial because it is exactly like what I want to do. But commands from that tutorials are not available on my MA5608T

https://forum.huawei.com/enterprise/en/huawei/m/ViewThread.html?tid=467423&lang=en

"gpon ont home-gateway" and "ont internet-config" are not available on my OLT.

Any help please?

Hello, friend!

1. basic info

huawei(diagnose)%%scroll

huawei(diagnose)%%display time

huawei(diagnose)%%display board 0

huawei(diagnose)%%display patch all

huawei(diagnose)%%display version

huawei(diagnose)%%display efs active

huawei(diagnose)%%display efs standby

huawei(diagnose)%%display current-configuration

huawei(diagnose)%%display reboot-record active

huawei(diagnose)%%display reboot-record standby

huawei(diagnose)%%display reset-record

huawei(diagnose)%%display error active

huawei(diagnose)%%display error standby

huawei(diagnose)%%display flash state active

huawei(diagnose)%%display flash state standby

huawei(diagnose)%%display event history all

huawei(diagnose)%%display alarm history all

huawei(diagnose)%%display log all

huawei(diagnose)%%display log failure

huawei(diagnose)%%display system all

2. ping info, please exec the commands as the order strictly 

(diagnose)%%config 

(config)#display   arp   all 

(config)#display   statistics   service-port     0   

(config)#display   arp   all 

(config)#ping -a 192.168.x.x 192.168.x.x

(config)#display   arp   all 

(config)#display   ip routing-table  

(config)#display ip routing-table 2.2.x.x 

(config)#display statistics    service-port 0 

(config)#ping  -a 192.168.x.x 192.168.x.x 

(config)#display statistics    service-port 0   

(config)#diagnose 

(diagnose)%%display   statistics ptype 0/6

(diagnose)%%display mac-address all

3. debugging info

(diagnose)%%terminal monitor 

(diagnose)%%terminal debugging 

(diagnose)%ugging ip icmp 

(diagnose)%ugging arp 

(diagnose)%%ping -a 192.168.x.x 192.168.x.x 

(diagnose)%%ping 192.168.x.x 

(diagnose)%%undo terminal monitor 

(diagnose)%%undo terminal debugging 

(diagnose)%%undo   debugging    all 

4. other basic info

(diagnose)%%display   lastwords   current 

(diagnose)%%config 

(config)#display   arp   all 

(config)#display   statistics   service-port     0   

(config)#display mac-address all

Thanks!

Hi, 

Based on the information you provided:
MA5608T version: MA5600V800R015C00. 

The device version is too early and does not support the gpon ont home-gateway and ont internet-config commands.